Hostname: page-component-77c89778f8-7drxs Total loading time: 0 Render date: 2024-07-17T11:13:18.863Z Has data issue: false hasContentIssue false

Nanoindentation of Pressure Quenched Fullerenes and Zirconium Metal from a Diamond Anvil Cell

Published online by Cambridge University Press:  17 March 2011

Shane A. Catledge
Affiliation:
Department of Physics, University of Alabama at Birmingham (UAB) Birmingham, AL 35294-1170
Philemon T. Spencer
Affiliation:
Department of Physics, University of Alabama at Birmingham (UAB) Birmingham, AL 35294-1170
Jeremy R. Patterson
Affiliation:
Department of Physics, University of Alabama at Birmingham (UAB) Birmingham, AL 35294-1170
Yogesh K. Vohra
Affiliation:
Department of Physics, University of Alabama at Birmingham (UAB) Birmingham, AL 35294-1170
Get access

Abstract

The sample size employed in high pressure diamond anvil cells is limited to a diameter of typically 25 to 150 microns. While this size is often sufficient for diagnostics using synchrotron x-ray diffraction and Raman scattering, ex-situ measurements of mechanical properties using conventional microhardness indentation techniques is not feasible. For some materials, the high pressure phase(s) can be quenched to ambient pressure allowing further characterization by other techniques. We make use of the very small probe volume allowed by nanoindentation to investigate the pressure-quenched structures of both C70 fullerene and zirconium. For the case of C70, we show that the amorphous phase established above 35 GPa can be quenched to ambient, and that it shows a largely elastic indentation loading behavior with a hardness of 30 GPa. We establish that this hard carbon phase contains a mixture of sp2- and sp3-bonded carbon and that it can be produced from C70 fullerene by application of pressure at room temperature. With regard to zirconium metal, we confirm the irreversible transformation from the ambient hexagonal-close-packed phase to the simple hexagonal Ω-phase (AlB2 structure) and document an 80% increase in hardness that may be attributed to the presence of covalent bonding based on sd2-hybridized orbitals forming graphite-like nets in the (0001) plane of the AlB2 structure.

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. H. Mao, K. and Hemley, R. J., Phil. Trans. R. Soc. Lond. A 354, 13151331 (1996).Google Scholar
2. Patterson, J. R., Catledge, S. A., and Vohra, Y. K., App. Phys. Lett. 77, 1 (2000).Google Scholar
3. Lyapin, A. G., Brazhkin, V. V., Gromnitskaya, E. L., Popova, S. V., Stalgorova, O. V., Volshin, R. N., Bayliss, S. C., and Sapelkin, A. V., Appl. Phys. Lett. 76, 712 (2000).Google Scholar
4. Brazhkin, V. V., Lyapin, A. G., Popova, S. V., Antonov, Yu. V., Kluev, Yu. A., and Naletov, A. M., Rev. High Pressure Sci. Technol. 7, 989 (1998).Google Scholar
5. Sikka, S. K., Vohra, Y. K., and Chidambaram, R., Progress in Materials Science 27, 245 (1982).Google Scholar
6. Vohra, Y. K., Menon, E. S. K., Sikka, S. K., and Krishnan, R., Acta Metall. 29, 457 (1981).Google Scholar
7. Bychkov, F. Yu, Likhanan, N. Yu, and Maltsev, V. A., Fiz. Met. Metalloved. 36, 413 (1973).Google Scholar
8. Doherty, J. E., Gibbons, D. F., Acta metal. 19, 275 (1971).Google Scholar