Hostname: page-component-5c6d5d7d68-lvtdw Total loading time: 0 Render date: 2024-08-08T13:20:51.134Z Has data issue: false hasContentIssue false
  • English
  • Français

Morphology and Dielectric Properties of Reactively Sputtered Aluminum Nitride Thin Films

Published online by Cambridge University Press:  10 February 2011

A. G. Randolph  and
S.K. Kurinec
A. G. Randolph
Affiliation:
Departments of Microelectronic Engineering and Materials Science and Engineering, Rochester Institute of Technology, Rochester, NY 14623,
S.K. Kurinec
Affiliation:
Departments of Microelectronic Engineering and Materials Science and Engineering, Rochester Institute of Technology, Rochester, NY 14623,
Get access

Abstract

Aluminum nitride thin films (∼ 100 mn) have been deposited on silicon substrate by reactive sputtering using Al target in 1:1 Ar:N2 environment. The atomic force microscopy examination revealed continuous microcrystalline film structure. The Auger electron spectroscopic analysis show the presence of oxygen in the films. The annealing at 850 C in nitrogen is found to cause recrystallization and further oxidation of the films. The films can be characterized as lossy dielectrics with relative permittivity ∼ 10, higher than the bulk value of 8.9. Annealing the films is found to reduce anion vacancies and improve the dielectric strength within a range of a few MV/cm in these thin films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 449: Symposium N – III-V Nitrides , 1996 , 295
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ahmed, A.U., Rys, A., Singh, N., Edger, J.H., and Yu, Z. J., J. Electrochem. Soc., 139, p. 1146, (1992).Google Scholar
2. Kovacich, J.A., Kasperkiewicz, J., Lichtman, D., Aita, C.R., J. Appl. Phys., 55, p. 2935 (1984).Google Scholar
3. Ansart, F. and Bernard, J., Phys. Stat. Sol. (a), 134, pp. 467–73, (1992).Google Scholar
4. Youngman, R.A. and Harris, J.H., J. Amer. Ceram. Soc., 73, pp. 3238–46, (1990).Google Scholar
5. Meng, W.J., Sell, J.A., and Perry, T.A., J. Appl. Phys., 75(7), pp. 3448–55, (1994)Google Scholar
6. Zolper, J.C., Rieger, D.J., Baca, A.G., Pearton, S.J., Lee, J.W., and Stall, R.A., Appl. Phy. Lett., 64, pp. 538–40, (1996).Google Scholar