Hostname: page-component-8448b6f56d-t5pn6 Total loading time: 0 Render date: 2024-04-23T14:11:59.239Z Has data issue: false hasContentIssue false
  • English
  • Français

MOCVD of Yttria Stabilized Zirconia on Co-Cr

Published online by Cambridge University Press:  15 February 2011

Anton C. Greenwald ,
Peter G. Loges  and
Alain E. Kaloyeros
Anton C. Greenwald
Affiliation:
Spire Corporation, Patriots Park, Bedford MA 01730
Peter G. Loges
Affiliation:
Spire Corporation, Patriots Park, Bedford MA 01730
Alain E. Kaloyeros
Affiliation:
Dept. of Phys., SUNY Albany, 1400 Washington Ave., Albany, NY 12222
Get access

Abstract

Thin films of yttria stabilized zirconia (YSZ) were deposited by metal organic chemical vapor deposition (MOCVD) on cobalt-chromium (Co-Cr) alloys used for orthopaedic implants. TMHD derivatives were preferred for the metalorganic sources over the less expensive fluorinated beta-diketonates as the latter left up to 1% fluorine in the film, as determined by Auger spectroscopy. Crystalline cubic structure of these YSZ films was verified by X-ray diffraction. Columnar grain growth gave a rough surface on thicker YSZ films, which increased wear of the mating polyethylene component during simulation tests. YSZ films under one micron thick were mirror smooth and reduced wear of the polymer component by 70% compared to uncoated Co-Cr. Film adhesion was excellent.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 363 , 1994 , 89
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Marz, S., Machine design, Nov. 9, 88–92, (1989).Google Scholar
2. Rose, R.M., et. al., J. Biomed. Mat. Res., 18, 207 (1984).Google Scholar
3. Willber, H.G. and Semlitsch, M., J. Biomed. Mater. Res., 11, 157 (1977).Google Scholar
4. Harris, W.H. and Sledge, C.B., New England J. of Med., 323 No. 12, 801 (1990).Google Scholar
5. Swartz, G.L., Proc. 36th Annual ORS, 56, 483 (1990).Google Scholar
6. Greenwald, A.C., et. al., (Mat. Res. Soc. Symp. Proc. 335, Pittsburgh, PA, 1994).Google Scholar
7. Diamond, W.J., Practical Experimental Designs, (Von Nostrand Reinhold Co., NY, 1981).Google Scholar
8. Handbook of Chemistry and Physics, 67th ed. (CRC Press, Boca Ratan, FL. 1986).Google Scholar