Hostname: page-component-848d4c4894-2xdlg Total loading time: 0 Render date: 2024-06-19T17:31:03.631Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructures of XD™ MoSi2+SiCp Composites

Published online by Cambridge University Press:  01 January 1992

C.R. Feng  and
D.J. Michel
C.R. Feng
Affiliation:
Materials Science and Technology Division, Naval Research Laboratory, Washington, DC 20375
D.J. Michel
Affiliation:
Materials Science and Technology Division, Naval Research Laboratory, Washington, DC 20375
Get access

Abstract

The microstructure of MoSi2 composite materials reinforced with 30vol% SiC particulate were investigated by TEM. These materials were initially produced by the XD™ process followed by either HIPing or forging.

The microstructural study revealed no significant differences between the HIPed and forged materials. In both materials, the size of the SiC particulate was found to vary from submicron to 30jtm and twins and stacking faults were observed in the SiC. No orientation relationships between the SiC and MoSi2 were found and dislocations emitted from the SiC/MoSi2 interfaces were noticed.

The distribution of dislocations in the MoSi2 matrix was nonuniform. The morphology of the dislocation structures may be categorized into three groups: 1) individual; 2) array; and 3) networks. [100]/[010] prismatic loops and (110) twins also were observed in some grains.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 288: Symposium L – High-Temperature Ordered Intermetallic Alloys V , 1992 , 1051
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Schlichting, J., High Temp.- High Pressures, 10, 241 (1978).Google Scholar
2. Gac, F.D. and Petrovic, J. J., J. Am. Ceram. Soc., 68, C-200 (1985).Google Scholar
3. Meschter, P.J. and Schwartz, D.S., JOM, 41 (11), 52, (1989).Google Scholar
4. Yang, J.-M., Kai, W. and Jeng, S.M., Scripta Metall., 23, 1953 (1989).Google Scholar
5. Lim, C.B., Yano, T. and Iseki, T., J. Mater. Sci., 24, 4144 (1989).Google Scholar
6. Lee, E.W., Cook, J., Khan, A, Mahapatra, R. and Waldman, J., JOM, 43 (3), 54 (1991) .Google Scholar
7. Aikin, R.M. Jr., J. Ceram. Eng. Sci. Proc., 12, 1643 (1991).Google Scholar
8. Aikin, R.M. Jr., Mat. Sci. Eng., A155, 121 (1992).Google Scholar
9. Lee, E.W., Cook, J., Khan, A., Mahapatra, R. and Waldman, J., JOM, 42, No. 3, 54 (1991).Google Scholar
10. Unal, O., Petrovic, J.J., Carter, D.H. and Mitchell, T.E., J. Am. Ceram. Soc., 73, 1752 (1990).Google Scholar
11. Boldt, P.H., Embury, J.D. and Weatherly, G.C., Mat. Sci. Eng., A155, 251, (1992).Google Scholar
12. Mitchell, T.E., Castro, R.G. and Chadwick, M.M., Phil. Mag. A, 65, 1339, (1992).Google Scholar