Hostname: page-component-7479d7b7d-68ccn Total loading time: 0 Render date: 2024-07-11T08:30:39.171Z Has data issue: false hasContentIssue false

Microstructural Stability of Directionally Solidified Eutectic NiAl-Mo Under Static and Thermal Cycling Conditions

Published online by Cambridge University Press:  15 February 2011

M. T. Kush
Affiliation:
The University of Michigan, Department of Materials Science and Engineering, Ann Arbor, MI 48109–2136
J. W. Holmes
Affiliation:
The University of Michigan, Department of Mechanical Engineering and Applied Mechanics, Ann Arbor, MI 48109–2125
R. Gibala
Affiliation:
The University of Michigan, Department of Materials Science and Engineering, Ann Arbor, MI 48109–2136
Get access

Abstract

The quasi-binary eutectic NiAl-9% Mo with faceted molybdenum fibers was subjected to both thermal annealing conditions and to annealing under thermal cycling conditions to determine the microstructural stability of this alloy. The static temperature tests were run at 0.85TM - 0.97TM in an argon gas atmosphere. The thermal cycling tests were performed between temperatures of 700°C and 1200°C by induction heating disk-shaped specimens in an argon gas atmosphere using time-temperature heating and cooling profiles to approximate potential engine applications. To quantify microstructural changes, the fiber size and size distribution and number of fibers per unit area were measured as a function of time at temperature. The overall results demonstrate that the directionally solidified eutectic NiAl-9Mo subjected to thermal fatigue conditions exhibits cell boundary coarsening and large shape changes, whereas the microstructure under static stress-free annealing is stable.

Type
Research Article
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Walter, J.L. and Cline, H.E., Met. Trans., 1, 12211229 (1970).Google Scholar
2. Cline, H.E. and Walter, J.L., Met. Trans., 1, 29072917 (1970).Google Scholar
3. Walter, J.L. and Cline, H.E., Met. Trans., 4, 3338 (1973).Google Scholar
4. Cline, H.E., Walter, J.L., Lifshin, E. and Russel, R.R., Met. Trans., 2, 189194 (1971).Google Scholar
5. Darolia, R., Lahrman, D.F., Field, R.D., Dobbs, J.R., Chan, K.M., Goldman, E.H. and Konitzer, D.G., in Ordered Intermetallics-Physical Metallurgy and Mechanical Behavior. Liu, C.T., Cahn, R.W. and Sautoff, G., eds., Kluwer Academic Publishers, The Netherlands, 679698 (1991).Google Scholar
6. Kush, M.T., Holmes, J.W. and Gibala, R., Mat. Res. Soc. Symp. Proc., 350, 189 (1994).Google Scholar
7. ABAOUS Users Manual. Hibbitt, , Karlsson and Sorensen, Inc., Providence, R.I., (1982).Google Scholar