Hostname: page-component-8448b6f56d-xtgtn Total loading time: 0 Render date: 2024-04-23T21:47:36.340Z Has data issue: false hasContentIssue false
  • English
  • Français

Macroscopic 2D Design of Micro/Nano Grain Architectures by Laser Interference Metallurgy

Published online by Cambridge University Press:  01 February 2011

Frank Muecklich ,
Carsten Gachot ,
Rodolphe Catrin ,
Ulrich Schmid  and
Andrés Lasagni
Frank Muecklich
Affiliation:
Georgia Institute of Technology, Woodruff School of Mechanical Engineering, 801 Ferst Drive, Atlanta, GA 30332-0405, USA, Atlanta, GA, 30363, United States, 404 385 3407
Carsten Gachot
Affiliation:
c.gachot@mx.uni-saarland.de, Saarland University, Functional Materials, Saarbruecken, N/A, Germany
Rodolphe Catrin
Affiliation:
r.catrin@mx.uni-saarland.de, Saarland University, Functional Materials, Saarbruecken, N/A, Germany
Ulrich Schmid
Affiliation:
u.schmid@lmm.uni-saarland.de, Saarland University, Chair of Micromechanics, Microfluidics/Microactuators, Saarbruecken, N/A, Germany
Andrés Lasagni
Affiliation:
a.lasagni@gatech.edu, Georgia Institute of Technology, W. Woodruff School of Mechanical Engineering, Atlanta, GA, 30332-0405, United States
Get access

Abstract

Tailoring of micro/nano structures and surface functionalization are key goals in surface processing of materials. A new technology for a unique geometric precise 2D micro/nano design of grain architectures is presented. By means of super lateral grain growth crystalline lattice patterns such as line-, dot- and cross-like patterns were generated. The grain dimensions may be selected between a few nanometers and about 10 micrometers. The phase and grain formation was characterized by Electron Backscatter Diffraction with regard to orientation distribution and texture formation. Furthermore, dynamic aspects of this laser induced recrystallization process are studied, such as the heat transport in the films, comparing the vertical with the lateral solidification velocities by two-dimensional finite element method (FEM) simulations. Finally, the mechanical properties of the tailored thin films have been determined using nanoindentation experiments.

Keywords

lasernanostructuregrain size
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1059: Symposium KK – Nanoscale Pattern Formation , 2007 , 1059-KK04-06
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Mücklich, F., Lasagni, A., Daniel, C., Int. J. of Mat. Res. 97, 1337 (2006).Google Scholar
2. Lasagni, A., Holzapfel, C., Mücklich, F., Proc. Mat. Res. Soc. Symp. 890–Y04, 02.1 (2006).Google Scholar
3. Bergmann, R.B., Köhler, J., Dassow, R., Zaczek, C., Werner, J.H., Phys. Stat. Sol. (a) 166, 587 (1998).Google Scholar
4. Im, J. S., Crowder, M. A., Sposili, R. S., Leonard, J. P., Kim, H. J., Yoon, J. H., Gupta, V. V., Song, H. Jin, Cho, H. S., Phys. Stat. Sol. (a), 166 603 (1998).Google Scholar
5. Arzt, E., Acta. Mat. 46, 5611 (1998)Google Scholar
6. Schmid, U., Seidel, H., J. Vac. Sci. Technol. A 24, 6 (2006)Google Scholar
7. Schmid, U., Seidel, H., Thin Solid Films, 516, 898 (2008)Google Scholar
8. Acevedo, D., Lasagni, A., Barbero, C., Mücklich, F., Adv. Mater. 19, 1272 (2007).Google Scholar
9. Zhong, Z., Wang, X., J. Appl. Phys., 100, 044310 (2006).Google Scholar
10. Gachot, C., Lasagni, A., Leibenguth, P., Schmid, U., Barnoush, A., Mücklich, F., Acta. Mat.(submitted)Google Scholar
11. Aichmayr, G., Toet, D., Mulato, M., Santos, P.V., Spangenberg, A., Christiansen, S., Albrecht, M., Strunk, H. P., phy. stat. sol.(a). 166, 659 (1998).Google Scholar
12. Catrin, R., Lasagni, A., Gachot, C., Schmid, U., Mücklich, F., Adv. Eng. Mater., adem.200700328 (accepted for publication).Google Scholar
13. Lasagni, A., Holzapfel, C., Mücklich, F., Adv. Eng. Mater. 7, 487 (2005).Google Scholar
14. Oliver, W.C., Pharr, G.M., J. of Mat. Res. 7, 1564 (1992).Google Scholar