Hostname: page-component-848d4c4894-8bljj Total loading time: 0 Render date: 2024-06-19T17:35:28.670Z Has data issue: false hasContentIssue false

Low K Mesoporous Silica Films Through Template-Based Processing

Published online by Cambridge University Press:  15 February 2011

P.J. Bruinsma
Affiliation:
Pacific Northwest National Laboratory, P.O. Box 999, Richland, WA 99352
N.J. Hess
Affiliation:
Pacific Northwest National Laboratory, P.O. Box 999, Richland, WA 99352
J.R. Bontha
Affiliation:
Pacific Northwest National Laboratory, P.O. Box 999, Richland, WA 99352
J. Liu
Affiliation:
Pacific Northwest National Laboratory, P.O. Box 999, Richland, WA 99352
S. Baskaran
Affiliation:
Pacific Northwest National Laboratory, P.O. Box 999, Richland, WA 99352
Get access

Abstract

Low dielectric-constant mesoporous silica films were prepared by condensation of a silicate network around surfactant micellar structures. Adherent, porous films 0.5–1.0 μm in thickness, and containing an ordered assemblage of ≈2 nm diameter pores were synthesized by spin-coating water/ethanol-based solutions containing a silica precursor and surfactant template. In this paper, film deposition conditions are described, and film thickness, porosity, refractive index and dielectric constant measured by ellipsometry are presented. Using a coating solution containing tetraethyl orthosilicate (TEOS) and a cationic cetyltrimethylammonium chloride (CTAC) surfactant template, the film porosity and dielectric properties were controlled over a wide range by adjusting the CTAC/TEOS molar ratio. With the CTAC/TEOS ratio between 0.1 and 0.15, the pores were highly ordered in hexagonal arrays after heat treatment at 550 °C. With a CTAC/TEOS ratio of 0.21, films with a pore volume of ≈64% (≈36 vol% silica) could be synthesized. The measured index of refraction for these highly porous films at 500 nm wavelength was 1.16, indicating that these films are potentially useful as low K interlayer dielectrics.

Type
Research Article
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hrubesh, L.W. and Poco, J.F., J. Non-Cryst. Solids, 188, 46 (1995).Google Scholar
2. Smith, D.M., Anderson, J., Cho, C.C. and Gnade, B.E., Mat. Res. Soc. Symp. Proc. 371, 261 (1995).Google Scholar
3. Kresge, C.T., Leonowicz, M.E., Roth, W.J., Vartuli, J.C. and Beck, J.S., Nature, 359, 710 (1992).Google Scholar
4. Beck, J.S., Vartuli, J.C., Roth, W.J., Leonowicz, M.E., Kresge, C.T., Schmidtt, K.D., Chu, C. T-W., Olson, D.H., Sheppard, E.W., McCullen, S.B., Higgins, J.B. and Schlenker, J.L., J. Am. Chem. Soc. 114, 10834 (1992).Google Scholar
5. Liu, J., Kim, A.Y., Virden, J.W. and Bunker, B.C., Langmuir 11, 689 (1995).Google Scholar
6. Liu, J., Kim, A.Y., US patent application (in review).Google Scholar
7. Yang, H., Kuperman, A., Coombs, N., Mamiche-Afara, S. and Ozin, G.A., Nature, 379, 703 (1996).Google Scholar
8. Aksay, I.A., Trau, M., Manne, S., Honma, I., Yao, N., Zhou, L., Fenter, P., Eisenberger, P.M. and Gruner, S.M., Science, 273, 892 (1996).Google Scholar
9. Yang, H., Coombs, N., Sokolov, I. and Ozin, G.A., Nature, 381, 589 (1996).Google Scholar
10. Ogawa, M., J. Am. Chem. Soc., 116, 7941 (1994).Google Scholar
11. Auvray, X., Petipas, C., Anthore, R., Rico, I. and Lattes, , J. Phys. Chem., 93, 7458 (1989).Google Scholar
12. Chiang, C., Mack, A.S., Pan, C., Ling, Y.-L. and Fraser, D.B., Mat. Res. Soc. Symp. Proc. 381, 123 (1995).Google Scholar