Hostname: page-component-7bb8b95d7b-495rp Total loading time: 0 Render date: 2024-09-12T13:33:37.115Z Has data issue: false hasContentIssue false
  • English
  • Français

Ion Implantation Damage in CdS Crystals Using RBS/Channeling and Tem

Published online by Cambridge University Press:  25 February 2011

N.R. Parikh ,
D.A. Thompson ,
R. Burkova  and
V.S. Raghunathan
N.R. Parikh
Affiliation:
Department of Engineering Physics and Institute for Materials Research McMaster University, Hamilton, Ontario, Canada, L8S 4M1
D.A. Thompson
Affiliation:
Department of Engineering Physics and Institute for Materials Research McMaster University, Hamilton, Ontario, Canada, L8S 4M1
R. Burkova
Affiliation:
Department of Engineering Physics and Institute for Materials Research McMaster University, Hamilton, Ontario, Canada, L8S 4M1 Short term visitor from Inst. for Semiconductor Technology, Botevgrad, 2140 Bulgaria;
V.S. Raghunathan
Affiliation:
Department of Engineering Physics and Institute for Materials Research McMaster University, Hamilton, Ontario, Canada, L8S 4M1 On leave from the Reactor Research Centre, Kalpakkam, India
Get access

Abstract

Implantation damage in single crystal of CdS produced by 60 keV Bi+ and 45 keV Ne+ at 50 K and at 300 K has been studied. Measurements of Cd disorder and dechanneling behaviour have been made by means of RBS/channeling for He ions ranging in incident energy from 1.0 to 2.8 MeV either along <0001> or <1120> axial channeling directions. The amount of disorder measured were two orders of magnitude lower than the calculated Cd disorder. Damage when analysed along the <0001> axis is larger than when analysed along the <1120> axis.Xmim values for the implanted crystals decreases as the EO increases, when analysed along <0001> direction. TEM observations of Bi implanted samples show that the dislocation loops of b = 1/3 <1120> are produced. Attempts have been made to correlate the RBS/channeling results with the defect strictures observed in microscopy.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 27: Symposium E – Ion Implantation and Ion Beam Processing of Materials , 1983 , 323
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Chernow, F., Eldridge, G., Ruse, G. and Wahlin, L., Appl. Phys. Lett. 12, 10, 339 (1968).Google Scholar
2. Shiraki, Y., Shimada, T., and Komatsubara, K.F., J. Appl. Phys. 43, 2, 710 (1972).Google Scholar
3. Baxter, D., Ph.D. Thesis, Dept. of Electrical Enginnering, Univ. of Salford, England (1977).Google Scholar
4. Govind, P.K. and Fraikor, F.J., J. Appl. Phys. 42, 6, 2476 (1970).Google Scholar
5. Walker, R.S. and Thompson, D.A., Nucl. Instr. and Meth. 135, 489 (1976).Google Scholar
6. Miller, W.E., Hutchby, J.A., J. Appl. Phys. 46, 10, 4479 (1979).Google Scholar
7. Sigmund, P., Rad. Effect. 1, 15 (1969).Google Scholar
8. Kulp, B.A., Phys. Rev. 125, 6, 1965 (1962).Google Scholar
9. Yishiie, T., Iwanga, H., Shibata, N., Suzuki, K., Ichihara, M., and Takeuchi, S., Phil. Mag. A, 47, 3, 315 (1983).Google Scholar
10. Cockayne, D.J.H., Hons, A., and Spence, J.C.H., Phil. Mag. A, 42, 6, 773 (1980).Google Scholar