Hostname: page-component-77c89778f8-swr86 Total loading time: 0 Render date: 2024-07-17T12:08:19.756Z Has data issue: false hasContentIssue false
  • English
  • Français

Interface Reaction In Sic Reinforced Al3Ti-Based Intermetallic Matrix Composites

Published online by Cambridge University Press:  01 January 1992

Jian Wang ,
Qian Wang ,
Shipu Chen ,
Jian Sun  and
Gengxiang Hu
Jian Wang
Affiliation:
Department of Materials Science, Shanghai Jiao Tong University, Shanghai 200030, China
Qian Wang
Affiliation:
Department of Materials Science, Shanghai Jiao Tong University, Shanghai 200030, China
Shipu Chen
Affiliation:
Department of Materials Science, Shanghai Jiao Tong University, Shanghai 200030, China
Jian Sun
Affiliation:
Department of Materials Science, Shanghai Jiao Tong University, Shanghai 200030, China
Gengxiang Hu
Affiliation:
Department of Materials Science, Shanghai Jiao Tong University, Shanghai 200030, China
Get access

Abstract

The Al3Ti-based Ll2 intermetallic alloy Al66Fe9Ti25 has shown low density, high oxidation resistance, good strength and appreciable compression ductility at room temperature. To explore the approach of combined toughening and strengthening of this alloy, composites are being studied. The interface reactions between Al66Fe9Ti25 matrix and SiC reinforcement material during different fabrication processes were investigated using SEM, EDS, EPA and X-ray diffraction analyses. The extent of reaction was determined and the reaction products were identified. It was found that SiC is chemically incompatible with the Al66Fe9Ti25 matrix, strong interfacial reactions occurred during fabrication and the formation of ternary compounds leads to the deterioration of the matrix alloy.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 288: Symposium L – High-Temperature Ordered Intermetallic Alloys V , 1992 , 1105
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Yamaguchi, M., Umakoshi, Y., and Yamane, T. in High-Temperture Ordered Intermetallic Alloys II, edited by Stoloff, N.S., Koch, C.C., Liu, C.T., and Izumi, O. (Mater. Res. Soc. Symp. Proc. 81, Pittsburgh, PA, 1987) p.275.Google Scholar
2. Kumar, K.S. and Pickens, J.R., Scripta Metall. 22, 1015 (1988)Google Scholar
3. Tarnacki, J. and Kim, Y.W., Scripta Metall. 22, 329 (1988)Google Scholar
4. Zhang, S., Nic, J.P., and Mikkola, D.E., Scripta Metall. 24, 57 (1990)Google Scholar
5. Kumar, K.S. and Brown, S.A., Phil. Mag. A 65, 91 (1992)Google Scholar
6. Chen, Xiaofu, Wu, Xiaohua, Chen, Shipu and Hu, Gengxiang, Scripta Metall. et Mater. 26, 1775 (1992)Google Scholar
7. Barin, I., Knacke, O., Kubascheweti, O., in Thermochemical Properties of Inorganic Substances (Springer-Verlag, Berlin, 1973, supplement 1977)Google Scholar
8. Mazdiyasni, S., Miracle, D.B., Dimiduk, D.M., Mendiratta, M.G. and Subramanian, P.R., Scripta Metall. 23 327 (1989)Google Scholar