Hostname: page-component-848d4c4894-r5zm4 Total loading time: 0 Render date: 2024-06-29T01:07:59.287Z Has data issue: false hasContentIssue false
  • English
  • Français

The Influence of Block Copolymers on Silica-Filled Polyisoprene

Published online by Cambridge University Press:  21 March 2011

Daniel Gurovich ,
Christopher W. Macosko  and
Matthew Tirrell
Daniel Gurovich
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455, U.S.A.
Christopher W. Macosko
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455, U.S.A.
Matthew Tirrell
Affiliation:
College of Engineering, University of California, Santa Barbara, CA 93106, U.S.A. Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455, U.S.A.
Get access

Abstract

The influence of PDMS-polyisoprene diblock copolymers on the dynamic rheological properties of silica-filled uncured polyisoprene was investigated. Unlike binary silica-polyisoprene systems, the ternary systems in our study showed a decrease in low-amplitude dynamic storage modulus (G') with room-temperature storage time. This aging behaviour is accompanied by an increase in the concentration PDMS segments at the filler-polymer interface, as measured by solid-state 1H NMR. The decrease in G' is thus attributed to a progressive disruption of a filler-filler network by selective block copolymer adsorption onto the filler surface.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 661: Symposium KK – Filled & Nanocomposite Polymer Materials , 2000 , KK7.3
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Wolff, S., Rubber Chem. Tech., 69, 325 (1996).Google Scholar
2. Cochrane, H., and Lin, C.S., Rubber Chem. Tech. 66, 48 (1993).Google Scholar
3. Hahn, E.L., Phys. Rev., 80, 580 (1950).Google Scholar
4. Dutta, N.K., Roy Choudhury, N., Haidar, B., Vidal, A., Donnet, J.B., Delmotte, L., and Chezeau, J.M., Polymer, 35, 4293 (1994).Google Scholar
5. Kenny, J.C., McBrierty, V.J., Rigbi, Z., Douglass, D.C., Macromolecules, 24, 436 (1991).Google Scholar
6. Ito, M., Nakamura, T., Tanaka, K., J. Appl. Polym. Sci., 30, 3493 (1985).Google Scholar