Hostname: page-component-76fb5796d-25wd4 Total loading time: 0 Render date: 2024-04-28T11:08:38.264Z Has data issue: false hasContentIssue false
  • English
  • Français

Hot Spots In 4H Sic P+N Diodes Studied By The Optical Beam Induced Current Technique

Published online by Cambridge University Press:  10 February 2011

M. Frischholz ,
K. Nordgren ,
K. Rottner ,
J. Seidel ,
A. Schöner  and
M. Bakowski
M. Frischholz
Affiliation:
ABB Corporate Research c/o IMC, Electrum 233 S-16440 Kista, Sweden
K. Nordgren
Affiliation:
ABB Corporate Research c/o IMC, Electrum 233 S-16440 Kista, Sweden
K. Rottner
Affiliation:
ABB Corporate Research c/o IMC, Electrum 233 S-16440 Kista, Sweden
J. Seidel
Affiliation:
IMC, Electrum 233, S-16440 Kista, Sweden
A. Schöner
Affiliation:
IMC, Electrum 233, S-16440 Kista, Sweden
M. Bakowski
Affiliation:
IMC, Electrum 233, S-16440 Kista, Sweden
Get access

Abstract

The optical beam induced current (OBIC) technique allows a direct imaging of high voltage PN junctions at a microscopic level under reverse operating conditions by measuring the local variation of the photocurrent. In this paper we focus on the application of the UV-OBIC technique for failure analysis of 4H SiC high voltage P+N diodes.

4H SiC P+N diodes with a 2-zone junction termination extension were used. The diodes were characterized in terms of reverse leakage current and breakdown voltage. Various devices were chosen for failure analysis on the base of early breakdown and/or excessive leakage current for OBIC measurements to study extrinsic failures. As a reference we selected diodes that blocked more than 2 kV with a leakage current density of typically less than 0.1 μA/cm2.

OBIC measurements have been used to detect failures in devices that manifest themselves as peaks or “hot spots” in the photocurrent distribution. Early breakdown of diodes could be attributed to formation of hot spots in the periphery of the diodes. The appearance of a hot spot preceded any noticeable increase in reverse leakage current and is thus a very sensitive tool to identify defective diodes already at low voltage levels.

The photocurrent generated by illumination of hot spots has been measured as a function of reverse bias voltage and the current multiplication factor has been determined.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 512: Symposium F – Wide Bandgap Semiconductors for High Power, High Frequency , 1998 , 157
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kordina, O., Bergman, J. P., Henry, A., Janzén, E., Savage, S., André, J., Ramberg, L. P., Lindefelt, U., Hermansson, W., and Bergman, K., Appl. Phys. Lett. 67 (11), 1561 (1995).Google Scholar
2. Neudeck, P. G. and Powell, J. A., IEEE Electron Device Lett. 15 (2), 63 (1994).Google Scholar
3. Tsvetkov, V. F., Glass, R. C., Henshall, D., Asbury, D. A., and Carter, C. H., in Silicon Carbide, IIINitrides and Related Materials 1997, eds. Pensl, G., Morkoç, H., Monemar, B. and Janzén, E., Materials Science Forum 264–268, 3 (1998).Google Scholar
4. Hara, K. in Silicon Carbide, III-Nitrides and Related Materials 1997, eds. Pensi, G., Morkoç, H., Monemar, B. and Janzén, E., Materials Science Forum 264–268, 901 (1998).Google Scholar
5. Neudeck, P. G., Huang, W., and Dudley, M., presented at 1997 Fall MRS Meeting, Dec. 1997, Boston, MA.Google Scholar
6. Lindsay, S. M., Phys. Stal. Sol. (a) 53, 311 (1979).Google Scholar
7. Frischholz, M., Mandel, Th., Helbig, R., Hammerschmidt, A., and Schmidt, G., Appl. Surface Science 65/66 784 (1993).Google Scholar
8. Rottner, K., Savage, S., André, J., Ramberg, L., Frischholz, M., and Helbig, R. in Silicon Carbide and Related Materials 1995, eds. Nakashima, S., Matsunami, H., Yoshida, S., and Harima, H., Inst. Phys. Conf. Series no. 142, 721 (1996).Google Scholar
9. Choyke, W. J., Patrick, L., Phys. Rev. 172, 769 (1968).Google Scholar