Hostname: page-component-76fb5796d-2lccl Total loading time: 0 Render date: 2024-04-26T02:32:41.732Z Has data issue: false hasContentIssue false
  • English
  • Français

High-k Dielectrics and Dual Metal Gates: Integration Issues for New CMOS Materials

Published online by Cambridge University Press:  10 February 2011

B. Claflin ,
K. Flock  and
G. Lucovsky
B. Claflin
Affiliation:
Department of Physics, North Carolina State University, Raleigh, NC 27695
K. Flock
Affiliation:
Department of Physics, North Carolina State University, Raleigh, NC 27695claflin@ncsu.edu
G. Lucovsky
Affiliation:
Department of Physics, North Carolina State University, Raleigh, NC 27695gerry_lucovsky@ncsu.edu
Get access

Abstract

Several metal and conducting metal nitride candidates were investigated for alternative gate electrode applications in future complimentary metal-oxide-semiconductor (CMOS) devices. High frequency capacitance-voltage (CV) measurements were performed on n-MOS and p-MOS capacitors with Al, Ta, TaN, TIN, or W2N gates and ultra-thin SiO2/Si3N4 dielectric stacks. The work functions of Al and Ta were close to the conduction band of Si as expected while all the metal nitrides had work functions slightly above mid-gap. The thermal stability of the metal nitrides and the metal/dielectric interfaces was studied by Auger electron spectroscopy (AES) following rapid thermal annealing (RTA). Integration requirements for dual metal gate electrodes in future CMOS devices are discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 567: Symposium R – Ultrathin SiO2 and Higg-K Materials for ULSI Gate Dielectrics , 1999 , 603
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Wang, S. Q. and Mayer, J. W., J. Appl. Phys. 64, 4711 (1988).10.1063/1.341208Google Scholar
2 Pretorius, R., Harris, J. M., Nicolet, M-A., Solid State Electron. 21, 667 (1978).10.1016/0038-1101(78)90335-0Google Scholar
3 As evidenced by the large number of such papers in this proceedings.Google Scholar
4 Lee, D. H., Yeom, K. H., Cho, M. H., Kang, N. S., Shim, T. E., 1996 Symp. VLSI Tech., p. 208 (1996).Google Scholar
5 Wittmer, M., Noser, J. R., Melchior, H., J. Appl. Phys. 54, 1423 (1983).10.1063/1.332167Google Scholar
6 Claflin, B., Binger, M., Lucovsky, G., J. Vac. Sci. Technol. A16, 1757 (1998), and references therein.10.1116/1.581297Google Scholar
7 Claflin, B., Lucovsky, G., J. Vac. Sci. Technol. B16, 2154 (1998).10.1116/1.590143Google Scholar
8 Claflin, B., Binger, M., and Lucovsky, G., Mat. Res. Soc. Symp. Proc. 525, 219 (1998)10.1557/PROC-525-219Google Scholar
9 Claflin, B., Binger, M., and Lucovsky, G., Yang, H., Mat. Res. Soc. Symp. Proc. 532, 171 (1998)10.1557/PROC-532-171Google Scholar
10 Yatsuda, T., Ma, Y., Habermehl, S., Lucovsky, G., Appl. Phys. Lett. 60, 434 (1992).10.1063/1.106626Google Scholar
11 Ma, Y., Yatsuda, T., Lucovsky, G., J. Vac. Sci. Technol. B11, 1533 (1993).10.1116/1.586965Google Scholar
12 Murarka, S. P., Metallization: Theory and Practice for VLSI and ULSI (Butterworth-Heinemann, Boston, MA, 1993), p. 56.Google Scholar