Hostname: page-component-7479d7b7d-qlrfm Total loading time: 0 Render date: 2024-07-12T19:32:50.841Z Has data issue: false hasContentIssue false
  • English
  • Français

High Resolution Displacement of Functional Groups onto Fluorocarbon Resin Surface by Using ArF Excimer Laser

Published online by Cambridge University Press:  10 February 2011

T. Shimizu  and
M. Murahara
T. Shimizu
Affiliation:
Faculty of Engineering, Tokai University, 1117 Kitakaname, Hiratsuka, Kanagawa 259–12, JAPAN
M. Murahara
Affiliation:
Faculty of Engineering, Tokai University, 1117 Kitakaname, Hiratsuka, Kanagawa 259–12, JAPAN
Get access

Abstract

A Fluorocarbon resin surface was selectively modified by irradiation with a ArF laser beam through a thin layer of NaAlO2, B(OH)3, or H2O solution to give a hydrophilic property. As a result, with low fluence, the surface was most effectively modified with the NaAlO2 solution among the three solutions. However, the contact angle in this case changed by 10 degrees as the fluence changed only 1mJ/cm2. When modifying a large area of the surface, high resolution displacement could not be achieved because the laser beam was not uniform in displacing functional groups. Thus, the laser fluence was successfully made uniform by homogenizing the laser beam; the functional groups were replaced on the fluorocarbon resin surface with high resolution, which was successfully modified to be hydrophilic by distributing the laser fluence uniformly.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 451: Symposium P – Electrochemical Synthesis and Modification , 1996 , 521
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Herman, Peter R., Chen, Boyi and Moore, Davud J., Mat. Res. Soc. Symp. Proc. vol. 285, 163–168(1992)Google Scholar
2. Gong, D.L., Xue, Q.J. and Wang, H.G.: J. Appl. poly. sci., 40, 1141(1990)Google Scholar
3. Okoshi, M., Murahara, M. and Toyoda, K.: J. Mater. Res., 7, No. 7,(1992)Google Scholar
4. Okoshi, M., Kashiura, H., Miyokawa, T., Toyoda, K. and Murahara, M., Mat. Res. soc. symp. proc. vol.279, 737–742 (1992)Google Scholar
5. Murahara, M. and Toyoda, K., J. Adhesion. Sci. Tech., 9. 1601(1995)Google Scholar
6. Okoshi, M., Toyoda, K. and Murahara, M., Mat. Res. Soc. Symp. Proc. Vol. 236, 377–382(1991)Google Scholar
7. Okoshi, M., Toyoda, K. and Murahara, M., Mat. Res. Soc. Symp. Proc. Vol. 397, 655–660 (1995)Google Scholar