Hostname: page-component-848d4c4894-sjtt6 Total loading time: 0 Render date: 2024-07-04T23:30:07.312Z Has data issue: false hasContentIssue false
  • English
  • Français

High Density Plasma Processing of Microcrystalline Si Thin Films

Published online by Cambridge University Press:  01 February 2011

P. C. Joshi ,
A. T. Voutsas  and
J. W. Hartzell
P. C. Joshi
Affiliation:
SHARP Laboratories of America, Inc., LCD Process Technology Laboratory, 5700 NW Pacific Rim Blvd., Camas, WA 98607
A. T. Voutsas
Affiliation:
SHARP Laboratories of America, Inc., LCD Process Technology Laboratory, 5700 NW Pacific Rim Blvd., Camas, WA 98607
J. W. Hartzell
Affiliation:
SHARP Laboratories of America, Inc., LCD Process Technology Laboratory, 5700 NW Pacific Rim Blvd., Camas, WA 98607
Get access

Abstract

In the present work, we report on the fabrication of high quality microcrystalline Si thin films by high-density PECVD technique. The typical deposition rate of the HD-PECVD μ-Si thin films was greater than 350 Å/min in the H2/SiH4 ratio range of 20-100. For a 150-nm-thick film deposited at a H2/SiH4 ratio of 20, the typical microcrystalline volume fraction and the average crystallite size corresponding to <111> orientation were 75% and 160 Å, respectively. The observed growth and properties of the μ-Si thin films show the potential of the high-density PECVD technique for the low temperature processing of high quality films with superior control of bulk and interfacial characteristics.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 862: Symposium A – Amorphous and Nanocrystalline Silicon Science and Technology–2005 , 2005 , A19.3
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Schropp, R. E. I. and Zeman, M., Amorphous and Microcrystalline Silicon Solar Cells (Kluwer, Boston, 1998).Google Scholar
2 Summers, S., Reehal, H. S., and Shirkoohi, G. H., J. Phys. D: Appl. Phys. 34, 2782 (2001).10.1088/0022-3727/34/18/311Google Scholar
3 Mukhopadhyay, S., Das, C., and Ray, S., J. Phys. D: Appl. Phys. 37, 1736 (2004).10.1088/0022-3727/37/13/003Google Scholar
4 Kondo, M., Suzuki, S., Nasuno, Y., and Matsuda, A., Mat. Res. Soc. Symp. Proc. Vol. 664, A4.3 (2001).10.1557/PROC-664-A4.3Google Scholar