Hostname: page-component-76fb5796d-zzh7m Total loading time: 0 Render date: 2024-04-26T17:44:47.115Z Has data issue: false hasContentIssue false
  • English
  • Français

Growth and Characterization of Silicon-Germanium Films on Oxide by VLPCVD/PE-VLPCVD

Published online by Cambridge University Press:  15 February 2011

Julie A. Tsai  and
Rafael Reif
Julie A. Tsai
Affiliation:
Department of Materials Science and Engineering, Microsystems Technology Laboratories, Massachusetts Institute of Technology, Cambridge, MA 02139
Rafael Reif
Affiliation:
Department of Electrical Engineering and Computer Science, Microsystems Technology Laboratories, Massachusetts Institute of Technology, Cambridge, MA 02139
Get access

Abstract

Results of Si1-xGex deposition on oxide-coated Si substrates using a PE-VLPCVD (Plasma-Enhanced Very-Low-Pressure Chemical Vapor Deposition) reactor are presented. Thin layers of poly-Si1-xGex deposited with SiH4 and GeH4 at ≤ 600°C had low C and O levels. Two growth modes were examined at 500°C: plasma-initiated thermal growth (VLPCVD) and full plasma-enhanced deposition (PE-VLPCVD). In both cases, Ge incorporation increases sublinearly with gas ratio, growth rates increase with Ge content, and the transition temperature between polycrystalline and amorphous deposition is lower for Si1-xGex than Si. On the other hand, compared to thermal growth, plasma-enhanced deposition promotes not only higher growth rates but also improved structural properties such as smoother surface Morphology, More columnar and oriented grains, and the unique feature of direct deposition onto oxide.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 317: Symposium B – Mechanisms of Thin Film Evolution , 1993 , 603
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. King, T.J. and Saraswat, K.C., IEDM Tech. Dig., P. 567 (1991).Google Scholar
2. Ootani, T., Hayakawa, S., Kakumu, M., Aono, A., Kinugawa, M., Takeuchi, H., Noguchi, K., Yabe, T., Sato, K., Maeguchi, K., and Ochii, K., IEDM J. Solid-State Circuits, 25 (5), 1082 (1990).CrossRefGoogle Scholar
3. Uchida, T., IEDM Tech. Dig., p. 5 (1991).Google Scholar
4. King, T.J., Pfiester, J.R., and Saraswat, K.C., IEEE Electron Dev. Lett., 12 (10), 533 (1991).CrossRefGoogle Scholar
5. King, T.J., Saraswat, K.C., and Pfiester, J.R., IEEE Electron Dev. Lett., 12 (11), 584 (1991).CrossRefGoogle Scholar
6. Grider, D.T., Ozturk, M.C., Zhong, Y., Wortman, J.J., and Littlejohn, M.A., Techcon'90 Extended Abstracts, p. 293 (1990).Google Scholar
7. King, C.A., Hoyt, J.L., Gronet, C.M., Gibbons, J.F., Scott, M.P., and Turner, J., IEEE Electron Dev. Lett., 10 (2) 52 (1989).CrossRefGoogle Scholar
8. Zhong, Y., Ozturk, M.C., Grider, D.T., Wortman, J.J., and Littlejohn, M.A., Appl. Phys. Lett., 57 (20) 2092 (1990).CrossRefGoogle Scholar
9. Holleman, J., Kuiper, A.E.T., and Verweij, J.F., J. Electrochem. Soc, 140 (6) 1717 (1993).CrossRefGoogle Scholar
10. Tsai, C., Ph.D. Thesis, MIT, 1992 Google Scholar
11. King, T.J., Pfiester, J.R., Shott, J.D., McVittie, J.P., and Saraswat, K.C., IEDM Tech. Dig., p. 253 (1990).Google Scholar