Hostname: page-component-7c8c6479df-hgkh8 Total loading time: 0 Render date: 2024-03-28T10:02:03.430Z Has data issue: false hasContentIssue false

A Finite Element Study on Constrained Deformation in an Intermetallic / Metallic Microlaminate Composite

Published online by Cambridge University Press:  10 February 2011

J. Heathcote
Affiliation:
Materials Department, University of California, Santa Barbara, CA 93106, johnh@engineering.ucsb.edu
G. R. Odette
Affiliation:
Department of Mechanical Engineering, University of California, Santa Barbara, CA 93106
G. E. Lucas
Affiliation:
Department of Mechanical Engineering, University of California, Santa Barbara, CA 93106
Get access

Abstract

The mechanical properties of intermetallic / metallic microlaminates were studied by determining the fundamental composite properties that control the fracture behavior: namely, the stress-displacement functions of the metal layers. Finite element methods were used to model the stress-displacement function of a constrained metal layer and to examine the effect of constituentproperties, residual stress, offset cracks in adjacent intermetallic layers, and debonding inclusions in the metal layer. Finally, FEM models representative of four specific microlaminates weredeveloped and the results were compared to experimentally determined σ(u)'s for those composites. Determining these fundamental composite properties and showing how they control the mechanical behavior gives insight into the optimum design of this composite system.

Type
Research Article
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Odette, G.R., Chao, B.L., Sheckherd, J.W., Lucas, G.E.., Acta Metall. Mater., 40 (1992) 2381.Google Scholar
2. Heredia, F.E., He, M.Y.., Lucas, G.E., Evans, A.G., Konitser, D., Acta Metall. Mater., 41 (1993) 505.Google Scholar
3. Venkateswara, K.T., Odette, G.R., Ritchie, R.O., Acta Metall. Mater., 40 (1992) 353.Google Scholar
4. Heathcote, J., Odette, G R., Lucas, G.E., Rowe, R.G., these proceedings.Google Scholar
5. Heathcote, J., Odette, G. R., Lucas, G. E.. Rowe, R. G., Skelly, D., Acta Met Metall (in press).Google Scholar
6. Ogawa, K., Zhang, X. J., Kobayashi, T., Armstrong, R. W., Irwin, G. R., ASTM-STP-833, American Society for Testing and Materials, Philadelphia, PA, p. 393 (1984).Google Scholar
7. Kobayashi, T., and Shockey, D. A, Met. Trans., 18A, p. 1941 (1987).Google Scholar
8. Edsinger, K., Odette, G.R., Lucas, G.E., and Wirth, B., Effects of Radiation in Materials: 17th International, Gelles, , Nanstad, , Kumar, , Little, Editors, ASTM-STP, (in press).Google Scholar
9. ABAQUS, © Hibbitt, , Karlsson, , and Sorenson, , Inc., (1994).Google Scholar
10. Metals Handbook, 9th Edition, Vol.3, ASM, (1980) 777779.Google Scholar