Hostname: page-component-7479d7b7d-wxhwt Total loading time: 0 Render date: 2024-07-11T23:20:45.840Z Has data issue: false hasContentIssue false
  • English
  • Français

FDTD Modeling of Realistic Microwave Sintering Experiments

Published online by Cambridge University Press:  15 February 2011

Zhenlong Huang ,
Magdy F. Iskander ,
James Tucker  and
Hal D. Kimrey
Zhenlong Huang
Affiliation:
Electrical Engineering Department, University of Utah, Salt Lake City, UT 84112
Magdy F. Iskander
Affiliation:
Electrical Engineering Department, University of Utah, Salt Lake City, UT 84112
James Tucker
Affiliation:
Electrical Engineering Department, University of Utah, Salt Lake City, UT 84112
Hal D. Kimrey
Affiliation:
Electrical Engineering Department, University of Utah, Salt Lake City, UT 84112
Get access

Abstract

Computer modeling and numerical simulation provide a valuable tool for providing guidelines towards a successful routine experimentation with microwave sintering of ceramics. It is also expected that continued efforts in numerical simulation will lead to establishing procedures for the scale up and commercial utilization of this new technology.

In this paper, we utilize the FDTD technique to model sintering ceramics in multimode microwave cavities. The role of using process stimulus such as SiC rods on improving the uniformity of the microwave sintering process are also simulated. To help experimentally validate the obtained results, the FDTD electromagnetic power deposition results were combined with a 3D heat transfer program to calculate temperature distribution in samples and surrounding insulation. Results from the FDTD codes and comparisons with experimental measurements of sintering experiments are presented.

To improve the efficiency of the simulation and achieve more accurate results, we developed a variable mesh FDTD code to help focus the numerical results and hence improve the resolution in critical sites inside the sintering oven. Detailed solution procedures are described. We solved some test geometries with the uniform grid and the developed variable mesh codes and compared the obtained results to validate and check the accuracy of the solution procedure. Results from these comparisons are presented.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 347: Symposium O – Microwave Processing of Materials IV , 1994 , 331
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Iskander, M.F., Smith, R.L., Andrate, O., Kimrey, H., and Walsh, L., “FDTD simulation of Microwave Sintering of Ceramics in Multimode Cavities,” IEEE Transactions on Microwave Theory and Techniques, Vol. 42, pp. 793–800, May 1994 Google Scholar
[2] Iskander, M.F., “Modeling the Microwave Process - Challenges and new Directions,” Microwave: Theory and Application in Materials Processing, Ceramic Transactions, Vol. 36, pp. 167–187, (1993)Google Scholar
[3] Newman, J.D., Walsh, L., Evans, R., Tholen, T., Andrate, O.M., Iskander, M.F., Bunch, K.J. and Kimrey, H., “Experimental Validation of Numerical Simulations of the Microwave Sintering Process,” Microwave: Theory and Application in Materials Processing, Ceramic Transactions, Vol. 36, pp. 229–237, (1993)Google Scholar
[4] Iskander, M.F., Andrate, O., Virkar, A., and Kimrey, H., “Microwave Processing of Ceramics at the University of Utah - Description of Activities and Summary of Progress,” Microwave: Theory and Application in Materials Processing, Ceramic Transactions, Vol. 21, pp. 35–48, (1991)Google Scholar
[5] Iskander, M.F., “Computer Modeling and Numerical Techniques for Quantifying microwave interactions with materials,” Materials Research Society symposium Proceedings, Vol. 189, pp. 149–171, April, 1990 Google Scholar
[6] Iskander, M.F., “Computer Modeling and Numerical Simulation of Microwave heating Systems,” MRS Bulletin, Vol XVIII, No. 11, pp. 30–36, Nov. 1993 Google Scholar
[7] Kim, I.S. and Hoefer, W.J.R., “A local mesh refinement algorithm for the time-domain finite-difference method using Maxwell's curl equations”, IEEE Transactions on Microwave Theory and Techniques, Vol. 38 pp. 812–815, June 1990 Google Scholar
[8] Zivanoic, S.S., Yee, K.S., and Mei, K.K., “A subgridding method for the time-domain finite-difference method to solve Maxwell's equations”, IEEE Transactions on Microwave Theory and Techniques, Vol. 39, pp. 471–479, March 1991Google Scholar
[9] Prescott, D.T. and Shuley, N.V., “A method for incorporating different sized cells into the finite-different time-domain analysis technique”, IEEE Microwave Guided Wave Letters, Vol. 2, No. 11, pp. 434–436, Nov. 1992 Google Scholar