Hostname: page-component-76fb5796d-x4r87 Total loading time: 0 Render date: 2024-04-25T22:52:01.688Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication of Silicon Carbide PIN Diodes by Laser Doping and Planar Edge Termination by Laser Metallization

Published online by Cambridge University Press:  01 February 2011

Z. Tian ,
N.R. Quick  and
A. Kar
Z. Tian
Affiliation:
Laser-Aided Manufacturing, Materials and Micro-Processing Laboratory (LAMMP) College of Optics and Photonics/CREOL, University of Central Florida Orlando, FL 32816-2700, USA
A. Kar
Affiliation:
Laser-Aided Manufacturing, Materials and Micro-Processing Laboratory (LAMMP) College of Optics and Photonics/CREOL, University of Central Florida Orlando, FL 32816-2700, USA
Get access

Abstract

Silicon carbide PIN diodes have been fabricated using a direct write laser doping and metallization technique. Trimethyaluminum (TMA) and nitrogen are precursors used to laser dope p-type and n-type regions, respectively, and μ4.3 mm p-type doped junction and 4 mm ntype doped junction are fabricated in semi-insulating 6H-SiC wafers. Rutherford backscattering studies show that no amorphization occurred during the laser doping process. A planar edge termination is fabricated by laser metallization in argon ambient to form a high resistivity layer. With this termination, the leakage current of the PIN diodes can be suppressed effectively compared to that of diodes without edge termination. The performance of the diodes can also be tailored by shrinking the active area of the diode and by conventional annealing.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 864: Symposium E – Semiconductor Defect Engineering-Materials, Synthesis Structures and Devices , 2005 , E9.3
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Sengupta, D.K., Quick, N.R., Kar, A., Journal of Laser Applications, Vol.13, 26–31 (2001).Google Scholar
2 Handy, E.M., Row, M.V., Holland, O.W., Chi, P.H., Jones, K.A., Derenge, M.A., Vispute, R.D., and Venkatesen, T., J.Electron.Mater. 29, 1340 (2000).Google Scholar
3 Quick, N.R., US patent 5,145,741 (September 1992), US patent 5,837,607 (November 1998) and US patent 6,670,693 (December 2003).Google Scholar
4 Salama, I.A., Quick, N.R., Kar, A., ICALEO 2002.Google Scholar
5 Salama, I.A., Quick, N.R., Kar, A., Materials Research Society Symposium C, (2003).Google Scholar
6 Salama, I.A., Middleton, C.F., Quick, N.R., Boreman, G.D. and Kar, A., Symp. Nitride and Wide Bandgap Semiconductors for Sensors, Photonics and Electronics IV, 204th meeting of the Electrochemical Society, Orlando, Florida, October 12-16, 2003.Google Scholar
7 Tian, Z., Quick, N. R., Kar, A., Mat. Res. Soc. Symp. Proc. 815, J3.4 (2004).Google Scholar
8 Tian, Z., Quick, N.R., Kar, A., ICALEO 2004.Google Scholar
9 Tian, Z., Quick, N.R., Kar, A.. J Electron Mater. April, (2005) (in press).Google Scholar
10 Tian, Z., Quick, N.R., Kar, A.. Acta Mater. Accepted for publication.Google Scholar
11 Schöner, A. Ion implantation and diffusion in SiC. In: Zetterling, Carl-Mikael, editor. Process Technology for Silicon Carbide Devices, London (United Kingdom): INSPEC, the Institution of Electrical Engineers, 2002. P. 75.Google Scholar
12 Chelnokov, V. E., Strel'chuk, A. M., Ivanov, P. A., Lentz, G. and Parniere, C. in Proceedings of the 6th International Symposium on Power Semiconductor Devices and ICs, 1994. pp.253–256 Google Scholar