Hostname: page-component-848d4c4894-2xdlg Total loading time: 0 Render date: 2024-06-23T15:40:13.419Z Has data issue: false hasContentIssue false

Fabrication of Crystallized Si Film Deposited on a Polycrystalline YSZ Film/Glass Substrate at 500°C

Published online by Cambridge University Press:  01 February 2011

Susumu Horita
Affiliation:
horita@jaist.ac.jp, Japan Advanced Institute of Science and Technology, School of Materials Science, 1-1, Asahidai, Nomi, Ishikawa, 923-1292, Japan, +81-761-51-1561, +81-761-51-1149
Keisuke Kanazawa
Affiliation:
k-kanaza@jaist.ac.jp, Japan Advanced Institute of Science and Technology, School of Materials Science, 1-1, Asahidai, Nomi, Ishikawa, 923-1292, Japan
Kensuke Nishioka
Affiliation:
nishioka@jaist.ac.jp, Japan Advanced Institute of Science and Technology, School of Materials Science, 1-1, Asahidai, Nomi, Ishikawa, 923-1292, Japan
Koichi Higashimine
Affiliation:
koichi@jaist.c.jp, Japan Advanced Institute of Science and Technology, School of Materials Science, 1-1, Asahidai, Nomi, Ishikawa, 923-1292, Japan
Mikio Koyano
Affiliation:
koyano@jaist.ac.jp, Japan Advanced Institute of Science and Technology, School of Materials Science, 1-1, Asahidai, Nomi, Ishikawa, 923-1292, Japan
Get access

Abstract

We used a polycrystalline YSZ film deposited on the quartz substrate as a seed layer to enhance crystallization of the Si film deposited on it. The YSZ film was deposited by reactive sputtering at less than 50°C and the preferential orientation was (111). The 60-nm-thick Si film was deposited by e-beam evaporation method on the substrate with and without the YSZ film. It was found that the crystallization of the Si film deposited on the YSZ film occurs but not without the YSZ film at the temperature of 515°C. The SEM image of the Secco-etched Si film showed that the crystallized Si film consisted of ~50-nm-size grains and, from the TEM image, it is supposed that the Si grains are grown directly from the YSZ film.

Type
Research Article
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Nakazawa, K. and Tanaka, K., J. Appl. Phys. 68, 1029 (1990).Google Scholar
2. Veprek, S., Sarott, F. A. and Iqbal, Z., Phys. Rev. B 36, 3344 (1987).Google Scholar
3. Sameshima, T., Usui, S. and Sekiya, M., IEEE Electron Device Lett. 7, 276 (1986).Google Scholar
4. Sera, K., Okumura, F., Uchida, H., Itoh, S., Kaneko, S. and Hotta, K., IEEE Electron Device Lett. 36, 2868 (1989).Google Scholar
5. Fujiwara, H., Kondo, M. and Matsuda, A., Phys. Rev. B 63, 115306 (2001).Google Scholar
6. Bailat, J., Vallat-Sauvain, E., Feitknecht, L., Droz, C. and Shah, A., J. Appl. Phys. 93, 5727 (2003).Google Scholar
7. Horita, S., Muranaka, M. and Fujiyama, T., Japn, J. Appl. Phys. 34, 1942 (1995).Google Scholar
8. d'Aragano, F. Secco, J. Electrochem. Soc. 119, 948 (1972).Google Scholar
9. Cammarata, R. C., Thompson, C. V., Hayzelden, C. and Tu, K. N., J. Mater. Res. 5, 2133(1990).Google Scholar