Hostname: page-component-848d4c4894-jbqgn Total loading time: 0 Render date: 2024-06-23T15:32:00.081Z Has data issue: false hasContentIssue false
  • English
  • Français

The Evolution of Prior-BCC Grain Boundary Cracking During In-situ Creep Deformation of a Ti-15Al-33Nb(at%) Alloy

Published online by Cambridge University Press:  26 February 2011

Christopher J. Cowen  and
Carl J. Boehlert
Christopher J. Cowen
Affiliation:
cowenchr@egr.msu.edu, Michigan State University, Chemical Engineering and Materials Science, 2527 Engineering Building, East Lansing, MI, 48824-1226, United States
Carl J. Boehlert
Affiliation:
boehlert@egr.msu.edu, Michigan State University, Chemical Engineering and Materials Science, 2527 Engineering Building, East Lansing, MI, 48824-1226, United States
Get access

Abstract

In-situ tensile-creep experiments were performed on a Ti-15Al-33Nb(at%) alloy using a specialized tensile stage placed within the vacuum chamber of a Camscan 44 FE scanning electron microscope (SEM). The creep damage evolution on the sample surface was chronicled through backscattered electron (BSE) imaging as a function of stress, time, and creep displacement at 650°C. The experiments revealed that the prior-BCC grain boundaries were the locus of damage accumulation during creep and significant grain boundary cracking was observed. The grain boundary cracking was verified to occur within the bulk of the material through post-mortem analysis.

Keywords

Tigrain boundariesscanning electron microscopy (SEM)
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 980: Symposium II – Advanced Intermetallic-Based Alloys , 2006 , 0980-II05-05
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Boehlert, C.J. and Miracle, D.B., Metall. Mater. Trans. A. 30, 2349 (1999).Google Scholar
2. Hayes, R.W., Scr. Metall. 34, 1005 (1996).Google Scholar
3. Rowe, R.G. and Larsen, M., in: Titanium 1995, edited by Blenkinsop, P.A., Evans, W.J., and Flowers, H.M., The University Press, Cambridge, UK, 364 (1996).Google Scholar
4. Boehlert, C.J. and Bingert, J.F., J. Mater. Process. Tech. 117, 401 (2001).Google Scholar
5. Cowen, C.J. and Boehlert, C.J., Phil. Mag. A 86, 99 (2006).Google Scholar
6. Boehlert, C.J., Cowen, C.J., Tamirisakandala, S., McEldowney, D.J., and Miracle, D.B., Scr. Mater. 55, 465 (2006).Google Scholar
7. Garofalo, F., Fundamentals of Creep and Creep-Rupture in Metals, (Macmillan, NY, 1965).Google Scholar