Hostname: page-component-84b7d79bbc-4hvwz Total loading time: 0 Render date: 2024-07-26T17:23:26.987Z Has data issue: false hasContentIssue false
  • English
  • Français

Epitaxy of Ni on Si(111) by Ion Beam Assisted Deposition

Published online by Cambridge University Press:  21 February 2011

K. S. Grabowski  and
R. A. Kant
K. S. Grabowski
Affiliation:
Naval Research Laboratory, Code 4670, Washington, DC 20375
R. A. Kant
Affiliation:
Naval Research Laboratory, Code 4670, Washington, DC 20375
Get access

Abstract

Epitaxial growth of Ni (111) on Si (111) has previously been obtained at room temperature by 25-keV-Ni ion beam assisted deposition, where both ion and vapor fluxes were incident at 45° to the specimen normal. This work explores the effect of a wider range of deposition conditions on epitaxial film quality. Nominally 300-nm-thick films were deposited at room temperature on Si (111) and other substrates. The substrates were sputter cleaned by the Ni ion beam immediately prior to deposition. Ion energies of 25 to 175 keV, relative ion to vapor fluxes R from 0 to 0.1, and vapor deposition rates of 0.05 to 0.5 nm/s were examined. Bragg-Brentano symmetric x-ray diffraction evaluated film quality while Ni (220) grazing-incidence x-ray diffraction rocking curves verified film epitaxy. Film quality changed gradually over these deposition parameters, with an optimum at 25 keV and an R of about 0.01. At higher energies and R values sputtering and radiation damage destroyed the film epitaxy

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 187: Symposium J – Thin Film Structures and Phase Stability , 1990 , 237
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Grabowski, K.S., Kant, R.A., and Qadri, S.B. in Processing and Characterization of Materials Using Ion Beams, edited by Rehn, L.E., Greene, J., and Smidt, F.A. (Mater. Res. Soc. Proc. 128, Pittsburgh, PA 1989) pp. 279–284.Google Scholar
2. Grabowski, K.S., Kant, R.A., Qadri, S.B., and Gossett, C.R., presented at the 1989 AVS National Vacuum Symposium, Boston, MA, 1989 (to be published).Google Scholar
3. Liu, J.C. and Mayer, J.W. in Fundamentals of Beam-Solid Interactions and Transient Thermal Processine, edited by Aziz, M.J., Rehn, L.E., and Stritzker, B. (Hater. Res. Soc. Proc. 100, Pittsburgh, PA 1988) pp. 357–362.Google Scholar
4. Liu, J.C., Li, J., and Mayer, J.W. in Processing and Characterization of Materials Using Ion Beams, edited by Rehn, L.E., Greene, J., and Smidt, F.A. (Mater. Res. Soc. Proc. 128, Pittsburgh, PA 1989) p.297–307.Google Scholar
5. Wyk, G.N. Van, Rad. Eff. Lett. 57, 45 (1980).Google Scholar
6. Wyk, G.N. Van and Smith, H.J., Nucl. Instrum. Meth. 170, 433 (1980).Google Scholar
7. Rauschenbach, B. and Helming, K., Nucl. Instrum. Meth. B42, 216 (1989).Google Scholar
8. Smidt, F.A., in Structure-Property Relationships in Surface-Modified Ceramics, edited by McHargue, C.J., Kossowsky, R., and Hofer, W.O. (Kluwer Academic Publishers, Boston, 1989), p. 417.Google Scholar
9. Biersack, J.P. and Haggmark, L.G., Nucl. Instrum. Meth. 174, 257 (1980).Google Scholar
10. Villars, P. and Calvert, L.D., Pearson's Handbook of CrystallograDhic Data for Intermetallic Phases, (American Society for Metals, Metals Park, OH,1985), p. 2864.Google Scholar