Hostname: page-component-76fb5796d-zzh7m Total loading time: 0 Render date: 2024-04-25T11:20:49.743Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of Amorphous Carbon Films on the Performance of Porous Silicon Electroluminescence

Published online by Cambridge University Press:  11 February 2011

Bernard Gelloz  and
Nobuyoshi Koshida
Bernard Gelloz
Affiliation:
Dept of Electrical and Electronic Engineering, Faculty of Technology, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184 8588, Japan.
Nobuyoshi Koshida
Affiliation:
Dept of Electrical and Electronic Engineering, Faculty of Technology, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184 8588, Japan.
Get access

Abstract

Efficient electroluminescence (EL) is obtained at low operating voltages (<3 V) from n+-type silicon- electrochemically oxidized thin nanocrystalline porous silicon (PS)-amorphous carbon-Indium tin oxide (ITO) junctions. The effects of a few nanometer thick amorphous carbon film between PS and ITO on the EL characteristics have been investigated. The carbon film enhances the stability. The EL efficiency is improved due to a reduction of current density and an increase in EL intensity. In addition, the reproducibility from device to device is very much improved by the carbon film. The enhancement in stability should originate from the capping of PS by the carbon film and the high chemical stability of carbon and Si-C bonds, which should prevent PS oxidation. The carbon film acts as an efficient buffer layer between PS and ITO, resulting in enhanced mechanical, electrical and chemical stability of the top contact and providing high reproducibility. The thin carbon film has only positive effects on all the EL characteristics. This is a very important step towards application.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 737 , 2002 , F4.9
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Koshida, N. and Koyama, H., Appl. Phys. Lett. 60, 347 (1992).Google Scholar
2. Gelloz, B., Nakagawa, T. and Koshida, N., Appl. Phys. Lett. 73, 14, 2021 (1998).Google Scholar
3. Gelloz, B., Nakagawa, T. and Koshida, N., Mater. Res. Soc. Symp. Proc. 536, 15 (1998)Google Scholar
4. Gelloz, B. and Koshida, N., J. Appl. Phys. 88 (7), 4319 (2000)Google Scholar
5. Tsybeskov, L., Duttagupta, S. P. and Fauchet, P. M., Sol. State Com. 95, 7, 429 (1995)Google Scholar
6. Gelloz, B. and Koshida, N., Electrochem. Soc. Proc. PV 99–22, 27 (1999)Google Scholar
7. Koshida, N., Kadokura, J., Takahashi, M. and Imai, K. Mater. Res. Soc. Symp. Proc. 638, F18.3.1 (2001)Google Scholar
8. Simons, A. J., Cox, T. I., Loni, A., Canham, L. T. and Blacker, R., Thin Solid Films 297, 281 (1997)Google Scholar