Hostname: page-component-84b7d79bbc-rnpqb Total loading time: 0 Render date: 2024-07-27T15:17:01.580Z Has data issue: false hasContentIssue false

Effect of Radiation Damage on Bwr Core-Shroud Cracking

Published online by Cambridge University Press:  15 February 2011

Jun Kwon
Affiliation:
Dept. of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, PA, 16802, USA
Arthur T. Motta
Affiliation:
Dept. of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, PA, 16802, USA
Get access

Abstract

A model is presented that estimates the effect of radiation damage on stress corrosion cracking (SCC), resulting from microstructural evolution induced by irradiation. The model is based on the Ford-Andresen film-rupture and slip-dissolution model and on the observation that the crack propagation rate increases as the material hardens. The model relates the neutron and gamma exposure to the irradiation hardening and consequent increase in the crack tip strain rate. A chemical rate theory model was employed to describe the evolution of microstructure in stainless steel leading to radiation hardening. The increase in yield stress can be correlated to an increase in the crack tip strain rate, and thus to SCC behavior. This approach was used to evaluate the effects of irradiation hardening on core shroud cracking. The results show that hardening can have a substantial effect on core shroud cracking.

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. NRC Generic Letter 94-03, “Intergranular Stress Corrosion Cracking of Core Shroud in Boiling Water Reactors” (1994).Google Scholar
2. Petrovic, B., Haghighat, A., Motta, A., Kucukboyaci, V. and Kwon, J., in Proc. 1998 ANS Radiation Protection and Shielding Division Topical Conf (ANS, LaGrange Park, 1998), pp. II25 Google Scholar
3. Rehn, L.E. and Birtcher, R.C., J. Nucl. Mater. 205, 31 (1993).Google Scholar
4. Alexander, D.E. and Rehn, L.E., J. Nucl. Mater. 217, 213 (1994).Google Scholar
5. Stoller, R.E., in Effects of Radiation on Materials : 16th Int. Symp., edited by Kumar, S., Gelles, D.S., Nanstad, R.K., and Little, E.A. (ASTM STP 1175, Philadelphia, 1993), pp. 394423.Google Scholar
6. Ford, F.P. and Andresen, P.L., in Parkins Symposium on Fundamental Aspects of Stress Corrosion Cracking, edited by Breummer, S.M. et al. (TMS, Warrendale, 1992), pp. 4367.Google Scholar
7. Pawel, J.E., Rowcliffe, A.F., Alexander, D.J., Grossbeck, M.L., and Shiba, K., J. Nucl. Mater. 233–237, 233 (1996).Google Scholar
8. Payzant, E.A., Spooner, S., Zhu, X., Hubbard, C.R., Rosinski, S.T., and Dowicki, J., in NDE Engineering codes and Standards and Materials Characterization, edited by Cook, J.F., Cowfer, D.C., and Monahan, C.C. (ASME, New York, 1996), pp. 5561.Google Scholar
9. Anderson, T.L., Fracture Mechanics - Fundamentals and Applications, 2nd ed. (CRC Press, Boca Raton, 1995), p.463.Google Scholar
10. Willertz, L.E., Pennsylvania Power & Light Co., private communication.Google Scholar
11. Murakami, Y., Stress Intensity Factors Handbook (Pergamon Press, New York, 1987), p.725.Google Scholar
12. Stoller, R.E. and Odette, G. R., in Radiation Induced Changes in Microstructure: 13 th Int. Symp., edited by Garner, F.A., Packan, N.H., and Kumar, A.S. (ASTM STP 955, Philadelphia, 1987), pp. 371392.Google Scholar
13. Katoh, Y., Stoller, R.E., Kohno, Y., and Kohyama, A., J. Nucl. Mater. 191–194, 1144 (1992).Google Scholar
14. Hazelton, W.S. and Koo, W.H., NUREG-0313, NRC (1988).Google Scholar
15. Andresen, P.L., Ford, F.P., Murphy, S.M., and Perks, J.M., in Proceedings on the 4th Int. Sym. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, edited by Cubiciotti, D. (NACE, Houston, 1990), pp. 183.Google Scholar
16. Lucas, G.E., J.Nucl. Mater. 206, 297 (1993).Google Scholar
17. Brimhall, J.L., Cole, J.I., Vetrano, J.S., and Bruemmer, S.M. in Microstructure of Irradiated Materials, edited by Robertson, I.M. et al. (Mater. Res. Soc. Symp. Proc. 373, Pittsburgh, 1995) pp. 177182.Google Scholar
18. Norgett, M.J., Robinson, M.T., and Torrens, I.M., Nucl. Eng. Des. 33, 50 (1975).Google Scholar