Hostname: page-component-848d4c4894-mwx4w Total loading time: 0 Render date: 2024-06-15T08:54:12.067Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of Interfacial Oxide Thickness on Titanium Silicide Formation

Published online by Cambridge University Press:  25 February 2011

J. Donnelly ,
N. Brun ,
R. Pantel  and
P. Normandon
J. Donnelly
Affiliation:
CNET France Telecom, BP 98, Meylan 38243, France.
N. Brun
Affiliation:
CNET France Telecom, BP 98, Meylan 38243, France.
R. Pantel
Affiliation:
CNET France Telecom, BP 98, Meylan 38243, France.
P. Normandon
Affiliation:
CNET France Telecom, BP 98, Meylan 38243, France.
Get access

Abstract

TiSi2 formation on various substrates has been widely investigated in the past and one of the critical parameters has been found to be the quality of the interface before deposition. In this paper the quality of the suicide formed on a range of oxides, from lnm to 15nm, has been systematically studied using sheet resistance measurements, Scanning Electron Microscopy, Atomic Force Microscopy and Auger Electron Microscopy. The critical thickness, above which the quality of the suicide formed is affected, was found to be 2.2nm and no suicide was detected > 13.0nm. A notable difference in the suicide formation occured in a narrow band around 5.0nm. It is proposed that this is the transition region in which the oxide becomes the main source of Si for TiSi2 formation rather than the substrate.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 260: Symposium C – Advanced Metallization and Processing for Semiconductor Devices and Circuits , 1992 , 329
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Alperin, , IEEE J. Solid State Circuits, Vol. SC-20, (1), 61, 1985.Google Scholar
2. Pramanik, , J. Vac. Sci. Technol., B2, (4), 775, 1984.CrossRefGoogle Scholar
3. Wang, , J. Appl. Phys., 67, (6), 2932, 1990.Google Scholar
4. Krooshof, , J. Appl. Phys., 63, (10), 5110, 1988.Google Scholar
5. Ting, , J. Electrochem. Soc, Vol. 131, (12), 2934, 1984.CrossRefGoogle Scholar
6. Butz, , J. Vac. Sci. Technol., A1, (2), 771, 1983.CrossRefGoogle Scholar
7. Tanielian, , J. Vac. Sci. Technol., A3, (3), 714, 1985.Google Scholar
8. Taubenblatt, , J. Appl. Phys., 53, (9), 6308, 1982.CrossRefGoogle Scholar
9. Hsu, , J. Vac. Sci. Technol., A5, (4), 1402, 1987.Google Scholar
10. Merchant, , J. Vac. Sci. Technol., B2, (4), 762, 1984.CrossRefGoogle Scholar
11. Yun, , MRS Symp. Proc., Vol. 146, 1989.CrossRefGoogle Scholar
12. Koh, , J. Vac. Sci. Technol., B3, (6), 1715, 1985.Google Scholar