Hostname: page-component-7c8c6479df-24hb2 Total loading time: 0 Render date: 2024-03-28T16:07:27.379Z Has data issue: false hasContentIssue false

Effect of Excimer Laser Annealing on Ultra-low Temperature Gate Dielectrics

Published online by Cambridge University Press:  17 March 2011

Wonsuk Chung
Affiliation:
Department of Materials Science and Engineering, Cornell University, Ithaca, NY 14853
Michael O. Thompson
Affiliation:
Department of Materials Science and Engineering, Cornell University, Ithaca, NY 14853
Get access

Abstract

The effect of excimer laser annealing on the properties of ultra-low temperature (150°C) plasma enhanced chemical vapor deposited (PECVD) oxides was investigated. Annealing was performed using a 308 nm excimer laser incident directly on the oxides, at fluences up to the melting of the silicon and for as many as 3000 pulses. Following multiple shot irradiations below the silicon melt threshold, the CV threshold voltage was observed to decrease by ≍15V volts, coupled with an increase in the slope near threshold. Leakage currents measured by IV were not significantly changed. Property modifications are shown to be comparable to a 450°C thermal soak anneal. These results suggest that excimer laser annealing has potential to improve ultra-low temperature gate dielectrics for poly-Si Thin Film Transistors (TFTs) on plastic substrates.

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Young, N. D., Harkin, G., Bunn, R. M., McCulloch, D. J., Wilks, R. W., and Knapp, A. G., IEEE Electron Device Letters. 18, 1920 (1997)Google Scholar
2. Gosain, D. P., Noguchi, T., Usui, S., Japanese Journal of Applied Physics. Part 2. 39 (3A-B), L17981 (2000)Google Scholar
3. Carey, P. G., Smith, P. M., Theiss, S. D., Wickboldt, P., and Sigmon, T. W., Proc. SPIE – Int. Soc. Opt. Eng. (USA), 3636, 410 (1999)Google Scholar
4. Mei, P., Boyce, J. B., Hack, M., Lujan, R., Ready, S. E., Fork, D. K., Johnson, R. I., and Anderson, G. B., Journal of Applied Physics, 76 (5), 31943199 (1994)Google Scholar
5. Im, James S., Kim, H. J., and Thompson, Michael O., Applied Physics Letters, 63 (14), 19691971 (1993)Google Scholar
6. Smith, P. M., Carey, P. G., and Sigmon, T. W., Applied Physics Letters, 70 (3), 342344 (1997)Google Scholar
7. Lucovsky, G., Advanced Materials for optics and electronics, 6, 5572 (1996)Google Scholar
8. Plais, F., Agius, B., Abel, F., Siejka, J., Puech, M., Ravel, G., Alnot, P., and Proust, N., Journal of Electrochemical Society, 139 (5), 14891495 (1992 Google Scholar
9. Song, Juho, Ajmera, P. K., and Lee, G. S., Journal of Vacuum Science Technology. B, 14 (2) 727731 (1996)Google Scholar
10. Ray, S. K., Maiti, C. K., Lahiri, S. K., and Chakrabarti, N. M., Journal of Vacuum Science Technology. B, 10 (3), 11391150 (1992).Google Scholar
11. Reber, D. M. and Fonash, S. J., Materials Research Society Symposium Proceedings, 508, 121126 (1998)Google Scholar
12. Hirayama, Masaki, Sekine, Katsuyuki, Saito, Yuji, and Ohmi, Tadahiro, International Electron Device Meeting 1999. Technical Digest, 249–252 (1999)Google Scholar