Hostname: page-component-848d4c4894-r5zm4 Total loading time: 0 Render date: 2024-06-16T17:13:37.852Z Has data issue: false hasContentIssue false

The Effect of Dislocation Dissociation on Crack Tip Plasticity in L12and B2 Intermetallic Alloys

Published online by Cambridge University Press:  01 January 1992

Michael F. Bartholomeusz
Affiliation:
Department of Materials Science and EngineeringUniversity of Virginia, Charlottesville, VA 22903
Weigang Meng
Affiliation:
Department of Materials Science and EngineeringUniversity of Virginia, Charlottesville, VA 22903
John A. Wert
Affiliation:
Department of Materials Science and EngineeringUniversity of Virginia, Charlottesville, VA 22903
Get access

Abstract

Low toughness at ambient temperatures is an inherent problem in many ordered intermetallic alloys that otherwise have attractive properties for high temperature applications. One potential explanation of low toughness is the existence of an energy barrier for crack tip dislocation emission. A model describing the energy associated with emission of a dissociated superlattice dislocation from a crack tip in ordered intermetallic alloys has been formulated. Application of the model to a wide variety of intermetallic alloys with the L12 and B2 crystal structures has revealed a correlation between the observed macroscopic fracture mode and the calculated range of slip system orientations for which emission of a dissociated superlattice dislocation at ambient temperatures is possible. Additionally, the model has been used to predict the effects of lowering the stacking fault energy, increasing the thermal energy available for thermally activated dislocation emission, and changing the active slip system. Preliminary fractographic analyses have been conducted with a chromium-modified Al3Ti alloy to verify the model predictions.

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Rice, J.R. and Thomson, R., Phil. Mag. 29, 73 (1974).Google Scholar
2. Bartholomeusz, M.F. and Wert, J.A., Acta Metall. et Mater., 40, 673 (1992).Google Scholar
3. Bartholomeusz, M.F. and Wert, J.A., J. Mater. Res., 7, 919 (1992).Google Scholar
4. Baker, I. and Munroe, P.R., in High Temperature Aluminides & Intermetallics,Whang, S.H., Liu, C.T., Pope, D.P. and Stiegler, J.O. (eds), MRS, Warrendale, 1990, p. 425.Google Scholar
5. Mikkola, D.E., Nic, J.P., Zhang, S. and Milligan, W.W., ISIJ International, 31, 1076 (1991).Google Scholar
6. Miracle, D.B., Russell, S. and Law, C.C., in High Temperature Ordered Intermetallic Alloys III, Liu, C.T., Taub, A.I., Stoloff, N.S. and Koch, C.C. (eds), MRS, Pittsburgh, 1989, p. 225.Google Scholar
7. Darolia, R., Lahrman, D.F., Field, R.D. and Freeman, A.J. in High Temperature Ordered Intermetallic Alloys III, Liu, C.T., Taub, A.I., Stoloff, N.S. and Koch, C.C. (eds), MRS, Pittsburgh, 1989, p. 113.Google Scholar
8. George, E.P., Pope, D.P., Fu, C.L. and Schneibel, J.H., ISIJ International, 31, 1063 (1991).Google Scholar
9. Nic, J.P., Zhang, S. and Mikkola, D.E., in High Temperature Ordered Intermetallic Alloys IV,Johnson, L.A., Pope, D.P. and Stiegler, J.O. (eds), MRS, Pittsburgh, 1991, p. 697.Google Scholar
10. Pugh, S.F., Phil. Mag., 45, 823 (1954).Google Scholar
11. Meng, W., Vaudin, M., Bartholomeusz, M.F. and Wert, J.A., “Experimental assessment of a fracture mechanism model for an Al67Cr8Ti27 intermetallic alloy”, in preparation.Google Scholar