Hostname: page-component-7479d7b7d-8zxtt Total loading time: 0 Render date: 2024-07-12T19:25:27.100Z Has data issue: false hasContentIssue false

Effect of Crystallographic Structure of Substrate on Texture in Electrodeposited Ni Layers

Published online by Cambridge University Press:  01 February 2011

Takafumi Shimada
Affiliation:
shimada.t.aa@m.titech.ac.jp, Tokyo Institute of Technology, Precision and Intelligence Laboratory, 4259 Nagatsuta Midori-ku, Yokohama, 226-8503, Japan, 045-924-5631, 045-924-5631
Akinobu Shibata
Affiliation:
shibata.a.ab@m.titech.ac.jp, Tokyo Institute of Technology, Precision and Intelligence Laboratory, 4259 Nagatsuta Midori-ku, Yokohama, 226-8503, Japan
Chiemi Ishiyama
Affiliation:
cishiyam@pi.titech.ac.jp, Tokyo Institute of Technology, Precision and Intelligence Laboratory, 4259 Nagatsuta Midori-ku, Yokohama, 226-8503, Japan
Masato Sone
Affiliation:
msone@pi.titech.ac.jp, Tokyo Institute of Technology, Precision and Intelligence Laboratory, 4259 Nagatsuta Midori-ku, Yokohama, 226-8503, Japan
Yakichi Higo
Affiliation:
yhigo@pi.titech.ac.jp, Tokyo Institute of Technology, Precision and Intelligence Laboratory, 4259 Nagatsuta Midori-ku, Yokohama, 226-8503, Japan
Get access

Abstract

Effect of substrate on the texture of electrodeposited Ni layer was investigated by using various substrates; Ni-P alloy (amorphous), pure Cu (fcc) and pure Ni (fcc). In the case of Ni-P and Cu substrates, deposited Ni layer shows the (115) fiber texture and its formation was not biased by substrate. On the other hand, the formation of texture is not independent of Ni substrate because its texture is not ideal fiber.

Near the interface between deposited Ni layer and Ni-P or Cu substrates, fine columnar grains were observed. In contrast, on Ni substrate there are coarse columnar grains ahead of continuous epitaxial region. It is considered that texture of deposited Ni layer is not independent of Ni substrate due to the fact that these columnar grains satisfy a certain orientation relationship with respect to substrate.

Type
Research Article
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Weil, R.. Annu. Rev. Mater. Sci. 19, 165 (1989).Google Scholar
2. Kato, M.. Mater. Sci. Eng. A146, 205 (1991).Google Scholar
3. Ramussen, A.A., Jensen, J.A.D., Horsewell, A. and Somers, M.A.J.. Electrochim. Acta 47, 67(2001).Google Scholar
4. Amblard, J., Epelboin, I., Froment, M. and Maurin, G.. J. Apply. Electrochem. 9, 233 (1979).Google Scholar
5. Kollia, C., Spyrellis, N., Amblard, J., Froment, M. and Maurin, G.. J. Apply. Electrochem. 20, 1025 (1990).Google Scholar
6. Sato, K., Ishiyama, C., Sone, M. and Higo, Y.. Mater. Trans. 48, 1694 (2007).Google Scholar
7. Pantleon, K., Jensen, J.A.D. and Somers, M.A.J.. J. Electochem. Soc. 151, C45 (2004).Google Scholar
8. Pantleon, K., Somers, M.A.J.. Acta Mater. 52, 4929 (2004).Google Scholar