Hostname: page-component-848d4c4894-8bljj Total loading time: 0 Render date: 2024-06-20T04:05:08.893Z Has data issue: false hasContentIssue false
  • English
  • Français

Dimensionally Accurate Mold Inserts and Metal Components by Direct Metal Laser Sintering

Published online by Cambridge University Press:  10 February 2011

Jan-Erik Lind ,
Juha Kotila ,
Tatu Syvänen  and
Olli Nyrhilä
Jan-Erik Lind
Affiliation:
Rapid Product Innovations, Aholantie 17, 21290 Rusko, FINLAND
Juha Kotila
Affiliation:
Rapid Product Innovations, Aholantie 17, 21290 Rusko, FINLAND, jan-erik.lind@rapid-product-innovations.fi
Tatu Syvänen
Affiliation:
Rapid Product Innovations, Aholantie 17, 21290 Rusko, FINLAND, jan-erik.lind@rapid-product-innovations.fi
Olli Nyrhilä
Affiliation:
Rapid Product Innovations, Aholantie 17, 21290 Rusko, FINLAND, jan-erik.lind@rapid-product-innovations.fi
Get access

Abstract

One of the main deficiencies in today‘s rapid tooling techniques is the capability of producing only near net-shape parts. Direct Metal Laser Sintering (DMLS) is a technique that enables the fabrication of true net-shape parts in just a few hours with only minimum postprocessing. The DMLS is a laser-based rapid tooling process developed in Europe by Rapid Product Innovations (formerly Electrolux Rapid Development Finland) and EOS GmbH Germany. Rapid Product Innovations was also the first to implement this technology to functional prototyping by using two proprietary bronze-based powders and a new steel-based powder. The technique enables the fabrication of tailored microstructures from porous matrix to near full density. Thus, functionally gradient structures can be fabricated, i.e. material is sintered to full density only where it is needed. This paper describes the philosophy of fabricating true net-shape mold inserts and metal components, but also concentrates on how to maintain the dimensional accuracy even after the post-processing. The study shows that even +/− 0.05 mm accuracy can be obtained. The results of the study also illustrate the beneficial effects of reduced layer thickness and post-processing on the surface roughness and mechanical properties as well as the suitability of various conventional and non-conventional coatings. With reduced layer thickness, the step-shaped effect of the layers was no longer visible. The surface was even further improved by shot peening and coating. In addition, case studies from injection molding, pressure die-casting and direct metal component fabrication are presented.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 625: Symposium Y – Solid Freeform & Additive Fabrication – 2000 , 2000 , 45
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Nyrhilä, O., Pressureless Sintering of Metal Powders, M.Sc Thesis, University of Turku, 1993.Google Scholar
2 Nyrhilä, O., Syrjälä, S., U.S. Patent No. 5 061 439 (29 October 1991).Google Scholar
3 Syväinen, T., Direct Laser Sintering of Metals - Material and Process Development, M.Sc. Thesis, Tampere University of Technology, 1996.Google Scholar
4 Nyrhilä, O., Patent, U.S. No. 5 732 323 (24 March 1998).Google Scholar
5 Kotila, J., Development of Steel Based Metal Powder for DMLS-Process, M.Sc.Thesis, Tampere University of Technology, 1998.Google Scholar
6 German, R. M., Sintering Theory and Practice, John Wiley & Sons, New York, NY, 1996, p. 225.Google Scholar
7 Wang, W.-F., Effect of Tin Addition on the Microstructure Development and Corrosion Resistance of Sintered 304L Stainless Steels, J. Mater. Eng. and Perform., Vol. 8(6), pp. 649–652,(1999).Google Scholar
8 GmbH, EOS, presentation graphics, 1999.Google Scholar
9 Syvänen, T., Nyrhilä, O., Kotila, J., Lind, J-E., New Innovations in Direct Metal Laser Sintering Process - A Step Forward in Rapid Prototyping and Manufacturing, Proc. of 1999 ICALEO conference: Laser Materials Processing, San Diego, CA. (to be published).Google Scholar