Hostname: page-component-77c89778f8-n9wrp Total loading time: 0 Render date: 2024-07-16T23:13:23.777Z Has data issue: false hasContentIssue false
  • English
  • Français

Determination of the Fracture Toughness Parameters for an MDF Cement Composite

Published online by Cambridge University Press:  25 February 2011

M. Arzamendi ,
R. L. Sierakowski  and
W. E. Wolfe
M. Arzamendi
Affiliation:
The Ohio State University, Department of Civil Engineering, Columbus, Ohio 43210
R. L. Sierakowski
Affiliation:
The Ohio State University, Department of Civil Engineering, Columbus, Ohio 43210
W. E. Wolfe
Affiliation:
The Ohio State University, Department of Civil Engineering, Columbus, Ohio 43210
Get access

Abstract

The experimental results of fracture toughness testing of a Macro Defect (MDF) Free cement are presented. The material, a hydraulic cement with hydrolyzed polyvinyl polymers, behaves much like a hardened ceramic with measured maximum compressive and tensile strengths of 380 MN/m2 and 69 MN/m2 respectively. Fracture toughness tests were performed on compact tension (CT) and single edge notched beam (SENB) specimens cut from test panels which were supplied in 3mm, 5mm and 10mm thicknesses. The results were evaluated with respect to the fracture toughness parameter Kic using a modification of standard test methods as determined by observed natural behavior. The MDF material exhibited an essentially linear elastic behavior with a fracture toughness slightly higher than typical values recorded for hardened cement paste.

Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 64: Symposium S – Cement-Based Composites: Strain Rate Effects on Fracture , 1985 , 257
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Birchall, J.D., Howard, A.J. and Kendall, K., Nature 289, 388–390 (1981).Google Scholar
2. Birchall, J.D. and Kelly, A., Scientific American, 248, (1983).CrossRefGoogle Scholar
3. American Society for Testing and Materials, ASTM Annual Book of Standards, 0638-82 (1982); 0695-80 (1980); 0790-81 (1981); E399-81 (1981); E813-82 (1982).Google Scholar
4. Swamy, R.N., in Fracture Mechanics in Concrete, edited by Wittmann, (1983).Google Scholar
5. Broek, D., Elementary Engineering Fracture Mechanics, 3rd ed. Nijhoff, (1983).Google Scholar
6. Buresch, F.E., ASTM STP 678, 151–165, (1978).Google Scholar
7. Modeer, M., in Fracture Mechanics in Concrete, edited by Wittmann, (1983).Google Scholar