Hostname: page-component-5c6d5d7d68-qks25 Total loading time: 0 Render date: 2024-08-16T13:01:01.143Z Has data issue: false hasContentIssue false

Design and thermoreflectance imaging of high-speed SiGe superlattice microrefrigerators

Published online by Cambridge University Press:  03 August 2011

Bjorn Vermeersch*
Affiliation:
Department of Electrical Engineering, University of California – Santa Cruz, 1156 High Street, SOE2, Santa Cruz, CA 95064, U.S.A.
Je-Hyeong Bahk
Affiliation:
Department of Electrical Engineering, University of California – Santa Cruz, 1156 High Street, SOE2, Santa Cruz, CA 95064, U.S.A.
James Christofferson
Affiliation:
Department of Electrical Engineering, University of California – Santa Cruz, 1156 High Street, SOE2, Santa Cruz, CA 95064, U.S.A.
Ali Shakouri
Affiliation:
Department of Electrical Engineering, University of California – Santa Cruz, 1156 High Street, SOE2, Santa Cruz, CA 95064, U.S.A.
*
*Corresponding Author. Email: bvermeer@soe.ucsc.edu
Get access

Abstract

Over the past few years, thermoelectric (TE) materials have been receiving an increasing amount of attention owing to their promising potential for energy conversion and thermal management applications. Thermal characterisation techniques offer a powerful tool in investigating and optimizing the TE device performance. In addition, they can provide a better understanding of the underlying fundamental principles such as Peltier effects at the interfaces of the active medium. In this paper, we present the design and thermal characterisation of integrated highspeed microcoolers based on SiGe superlattices. The electrode metalisation is laid out as a coplanar waveguide, enabling to supply electrical pulses with short rise times to the coolers. We employ a variety of CCD-based transient thermoreflectance imaging methods to perform an extensive dynamic thermal analysis. These techniques provide 2-D temperature maps of the chip surface with ∼100ns temporal and submicron spatial resolution without the need to scan the sample. Net cooling in the 2 degree range is observed, with response times well below 1μs. This is almost two orders of magnitude faster compared to the best in the literature. The obtained images also confirm the previous observations that the Peltier cooling term responds faster than the Joule heating term, in agreement with their expected locality and associated thermal mass. This provides potential to study ultrafast electron-phonon interactions during Peltier effects.

Type
Research Article
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Riffat, S.B., Ma, X., Appl. Therm. Eng. 23(8), 913 (2003).Google Scholar
[2] Bell, L.E., Science 321(5895), 1457 (2008).Google Scholar
[3] Shakouri, A., Proc. IEEE 94(8), 1613 (2006).Google Scholar
[4] Vineis, C.J., Shakouri, A., Majumdar, A., Kanatzidis, M.G., Adv. Mater. 22, 3970 (2010).Google Scholar
[5] Grauby, S., Forget, B.C., Holé, S., Fournier, D., Rev. Sci. Instrum. 70(9), 3603 (1999).Google Scholar
[6] Vermeersch, B., Shakouri, A., Proc. IMAPS Thermal ATW Palo Alto CA, 2010.Google Scholar
[7] Vermeersch, B., Christofferson, J., Maize, K., Shakouri, A., De Mey, G., Proc. IEEE 26th SEMITHERM Santa Clara CA, pp. 228234, 2010.Google Scholar
[8] Farzaneh, M., Maize, K., Luerssen, D., Summers, J.A., Mayer, P.M., Raad, P.E., Pipe, K.P., Shakouri, A., Ram, R.J., Hudgings, J.A., J. Phys. D 42, 143001 (2009).Google Scholar
[9] Vermeersch, B., De Mey, G., Int. J. Therm. Sci. 46, 1319 (2010).Google Scholar
[10] Ezzahri, Y., Dilhaire, S., Patiño-Lopez, L.D., Grauby, S., Claeys, W., Bian, Z., Zhang, Y., Shakouri, A., Superlatt. Microstruct. 41, 7 (2007).Google Scholar
[11] Ezzarhi, Y., Christofferson, J., Maize, K., Shakouri, A., Proc. MRS Spring 09 San Francisco CA, 2009.Google Scholar
[12] Christofferson, J., Yazawa, K., Shakouri, A., Proc. IHTC14, 2010.Google Scholar