Hostname: page-component-848d4c4894-xm8r8 Total loading time: 0 Render date: 2024-07-06T19:58:39.636Z Has data issue: false hasContentIssue false
  • English
  • Français

Correlation between Processing, Composition, and Mechanical Properties of PECVD-SiN, Thin Films

Published online by Cambridge University Press:  16 February 2011

D. C. H. Yu  and
J. A. Taylor
D. C. H. Yu
Affiliation:
AT&T Bell Laboratories Allentown, PA 18103, U.S.A.
J. A. Taylor
Affiliation:
AT&T Bell Laboratories Allentown, PA 18103, U.S.A.
Get access

Abstract

The inter-relationship between plasma processing, composition, and mechanical properties of PECVD-SiNx, thin films was investigated. Results showed that by varying the gas feeding ratio of NH3/SiH4N2, one can obtain PECVD-SiNx, films of different composition and streu levels. For high stress films, the deposition rate is low, values of index of refraction and Si/N ratio are small. On the other hand, film density of such films is high; values of Young's modulus and N-H/Si-H relative bond density are large. A model which correlates film stress to that contributed by (1) lattice distortion induced by Si-H and NH bondings, (2) ion bombardment, (3) thermal mismatch between PECVD-SiNx films and silicon substrate, and (4) intrinsic stress introduced during the formation of covalent Si-N bonding is proposed and examined in this work.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 188: Symposium K – Thin Films: Stresses and Mechanical Properties II , 1990 , 79
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[01]. Sinha, A.K., and Lugujjo, E., Appl. Phys. Letters, 32 (1978), p. 245.Google Scholar
[02]. Sinha, A.K., Levinstein, H.J., Smith, T.E., Quintana, G., and Haszko, S.E., J. Electrochem. Soc., 125 (1978), p. 601.Google Scholar
[03]. Groothuis, S. and Schroen, W., 25 th Annu. Proc. IEEE Int. Reliability Phys. Synup., 1987, p.l.Google Scholar
[04]. Jones, R. Jr., 25 th Annu. Proc. IEEE Int. Reliability Phys. Symp., 1987, p. 1.Google Scholar
[05]. Hinode, K., Asano, I., and Homma, Y., IEEE Trans. Electon Dev., 36 (1989), p. 1050.Google Scholar
[06]. Santoro, J., J. Electrochem. Soc., 116 (1969), p. 361.Google Scholar
[07]. Sun, R.C., Clemens, J.T., and Nelson, J.T., Proc. of IRPS, April (1980), p. 244.Google Scholar
[08]. Chen, M.L., Semiconductor International, April (1988), p. 78.Google Scholar
[09]. Mitsuhashi, J., Nakao, S., and Matsukawa, T., IEDM, 1986, p. 386.Google Scholar
[10] Stinebaugh, W.H., Harrus, A.S., and Knolle, W.R., IEEE Trans. on Electron Devices, 36(1989), p. 542.Google Scholar
[11]. Yu, D.C.H., To be published.Google Scholar
[12]. Dautremont-Smith, W.C., Gottscho, R.A., and Shultz, R.J., Chapter 5, Semiconductor Materials and Process Technology Handbook for VLSI and ULSI, Noyes Publications, 1988.Google Scholar
[13]. Lanford, W.A. and Rand, M.J., J. Appl. Phys., 49 (1978), p. 2473.Google Scholar
[14]. Sinha, A.K., Levinstein, H.J., and Smith, T.E., J. Appl. Phys. 49 (1978), p. 2423.Google Scholar
[15]. Classen, W.A.P., Plasma Chemistry and Plasma Processing, 7(1987), p. 109.Google Scholar
[16]. Chang, M., Wong, J., and Wang, D., Solid State Technology, May (1988), p. 193.Google Scholar
[17]. Dun, H., Pan, P., White, F.R., and Douse, R.W., J. Electrochem. Soc., 128 (1981), p. 1555.Google Scholar
[18]. Martin, R.S., Ven, E.P. van de, and Lee, C.P., Proc. 5th IEEE VMIC Conference, 1988, p.Google Scholar
[19]. Morrell, R., Handbook of Properties of Technical & Engineering Ceramics, Part 1. p. 97.Google Scholar
[20]. Chang, C.P., Flamm, D.L., Ibbotson, D.E., and Mucha, J.A., J. Appl. Phys., 62 (1987), p. 1406.Google Scholar
[21]. Ibbotson, D.E., Chang, C.P., Flamm, D.L., and Mucha, J.A., SPIE, 797 (1987), p. 118.Google Scholar