Hostname: page-component-7479d7b7d-k7p5g Total loading time: 0 Render date: 2024-07-08T10:57:03.690Z Has data issue: false hasContentIssue false

Copper Phthalocyanine Nanowire Based Solar Cells

Published online by Cambridge University Press:  01 February 2011

Vijay Singh
Affiliation:
vsingh@engr.uky.edu, University of Kentucky, Department of Electrical & Computer Engineering, 453 Anderson Hall, Lexington, KY, 40506-0046, United States
Suresh Rajaputra
Affiliation:
rssingh@engr.uky.edu, University of Kentucky, Department of Electrical & Computer Engineering, 453 Anderson Hall, Lexington, KY, 40506-0046, United States
Sovannary Phok
Affiliation:
sphok@engr.uky.edu, University of Kentucky, Department of Electrical & Computer Engineering, 453 Anderson Hall, Lexington, KY, 40506-0046, United States
Goutham Chintakula
Affiliation:
gchin0@engr.uky.edu, University of Kentucky, Department of Electrical & Computer Engineering, 453 Anderson Hall, Lexington, KY, 40506-0046, United States
Gayatri Sagi
Affiliation:
gssagi0@engr.uky.edu, University of Kentucky, Department of Electrical & Computer Engineering, 453 Anderson Hall, Lexington, KY, 40506-0046, United States
Get access

Abstract

Photovoltaic devices based on organic semiconductors are of interest because of their potential as flexible, lightweight and inexpensive devices. One of the promising devices, involves the heterojunction between copper phthalocyanine (CuPc) and 3,4,9,10-perylenetetracarboxylic bis-benz-imidazole (PTCBI). Earlier, we reported, the highest Voc (1.125V) in a single organic heterojunction solar cell in an ITO/PEDOT:PSS/CuPc/PTCBI/Al structure. Results were interpreted in terms of a modified CuPc-Al Schottky diode for this thin PTCBI layer case and a CuPc-PTCBI heterojunction for the thick PTCBI case. We also reported the device characteristics of Copper phthalocyanine (CuPc)/Aluminum (Al) Schottky diode solar cells. Here, open circuit voltages (Voc) increased from 220 mV at 15 nm to 907 mV at 140 nm. Analysis of the current-voltage characteristics indicated that tunneling and interface recombination mechanisms are important components of the current transport at the CuPc/Al junction. With the objective of higher short circuit current densities in mind, we have extended our earlier work on organic semiconductors to nanowire based designs. In this paper, we report the fabrication, materials and electrical characterization of CuPc nanowire based solar cells in AAO templates by electro-deposition. The CuPc nanowires were electrochemically deposited into the AAO templates using CHCl3 (Chloroform) containing 10-4 M CuPc with 0.5 ml of CF3COOH (Trifluoro acetic acid). The nanowires were characterized by XRD, UV-Vis absorption spectroscopy, electron microscopy and electrical measurements. CuPc nanowires were also electrodeposited onto ITO/glass substrates and compared with templated nanowires for their structural, optical and electrical properties. Effect of the PEDOT: PSS buffer layer on the nanowire based device characteristics was also investigated.

Type
Research Article
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Forrest, S. R., Nature (London) 428, 911 (2004)Google Scholar
2. Yang, F., Shtein, M., and Forrest, S. R., Nat. Mater. 4, 37 (2005)10.1038/nmat1285Google Scholar
3. Singh, V.P., Singh, R.S., Parthasarathy, B., Aguilera, A., J. Anthony and M. Payne Appl. Phys. Lett. 86 (2005) 0821061.Google Scholar
4. Singh, V.P., Parthasarathy, B., Singh, R.S., Aguilera, A., Anthony, J. and Payne, M., Sol. Energy. Mater. Sol. Cells 90 (2006) 798.10.1016/j.solmat.2005.04.016Google Scholar
5. Kwong, C.Y., Djurisic, A.B., Chui, P.C., Lam, L.S.M., Chan, W.K., Applied Physics A (Materials Science Processing), A77 (2003) 555.10.1007/s00339-002-1493-6Google Scholar
6. Rajaputra, Suresh, Vallurupalli, Subhash and Singh, Vijay P., Journal of Materials Science: Materials in Electronics, 18 (2007) 1147 Google Scholar
7. Singh, V.P., Singh, R.S. and Karen E Sampson, Chapter VI in “Nanostructured Materials For Solar Energy Conversion” Edited by Soga, Tetsuo; ISBN-13: 978-0-444-52844-5, Elsevier BV (2006)Google Scholar
8. Sagi, Gayatri, M.S. Thesis, University of Kentucky, August 2007.Google Scholar
9. Takada, , Yoshioka, Masaki, Hirokazu, ; Tada, , Hirokazu, ; Matsushige, , Kazumi, Japanese Journal of Applied Physics, Part 2: Letters, 41, (2002) L73 10.1143/JJAP.41.L73Google Scholar
10. He, Zhibing, Zhao, Gaoling, and Han, Gaorong phys. Stat. sol. (a) 203, (2006) 518 10.1002/pssa.200421430Google Scholar
11. Peumans, Peter, Yakimov, Aharon and Forrest, Stephen R., J. Appl. Phys., 93 (2003) 3693.Google Scholar
12. Hill, I.G., Schwartz, J. and Kahn, A., Org. Electronics, 1 (2000) 5 Google Scholar
13. Shihub, S.I., Gould, R.D. This Solid Films 290–291 (1996) 390 10.1016/S0040-6090(96)09134-1Google Scholar
14. Tong, W.Y., Djurisic, A.B., Ng, A.M.C., Chan, W.K., Thin Solid Films 515 (2007) 52705274 10.1016/j.tsf.2006.12.184Google Scholar