Hostname: page-component-7bb8b95d7b-5mhkq Total loading time: 0 Render date: 2024-09-11T17:43:09.171Z Has data issue: false hasContentIssue false
  • English
  • Français

Condensation of Ultrafine Silica from a Laser-Induced Plume

Published online by Cambridge University Press:  25 February 2011

G.M. Chow  and
PR. Strutt
G.M. Chow
Affiliation:
Naval Research Laboratory, Washington, DC 20375
PR. Strutt
Affiliation:
Institute of Materials Science, the University of Connecticut, Storrs, CT 06269.
Get access

Abstract

The different silica-phase morphologies formed in synthesizing silica-metal matrix composites layers have been studied, using a new evaporation technique, involving rapid condensation of silica from a laser beam induced-ceramic plume. This process occurs within a reactive gas environment (98.5% hydrogen, 1.5% methane), with a heated tungsten filament in proximity to the laser beam-material interaction zone. The silica phase in the composite layers deposited on a nickel substrate exhibited different metastable morphologies, namely, nanometer-size amorphous fibers or linear-chain shape aggregates. There appeared to be a correlation between the morphology of the deposits and the position of the heated tungsten filament. When the tungsten filament was absent, silica was deposited in the form of clusters. In this case, depending on the beam-ceramic target interaction times, there was a shift in the Si-O stretching vibration characteristics. The laser beam-ceramic target interaction and the formation of the laser-induced ceramic plume are briefly discussed. Characterization techniques involved FTTR, X-ray diffraction, Auger and microprobe analysis, EDX and WDX analysis, SEM and TEM.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 157: Symposium A – Beam-Solid Interactions: Physical Phenomena , 1989 , 443
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

McCandlish, L.E., Polk, D.E., Siegel, R.W., and Kear, B.H. (editors) 132 Materials Research Society Proceedings (1989).Google Scholar
Eastman, J., and Siegel, R., Research and Development, p.56 (January 1989).Google Scholar
Averback, R.S., Hahn, H., Hofler, H.J., Logas, J.I., and Shen, T.C., 153 Materials Research Society Proceedings (1989).Google Scholar
Chow, G.M., Klemens, P.G., and Strutt, PR., J. Appl. Phys. 66, 3304 (1989).Google Scholar
Chow, G.M., and Strutt, P.R., submitted to J. of Materials Research.Google Scholar
Blombergen, N., Laser-Solid Interactions and Laser Processing, edited by Ferris, S.D., Leamy, H.J., Poate, J.M., (ATP, New York, 1979).Google Scholar
Boyd, I.W., Laser Processing of Thin Films and Microstructures. (Springer-Verlag Berlin Heidelberg New York, 1987).Google Scholar
Glang, R., Handbook of Thin Film Technology, edited by Maissel, L.I., Glang, R. (McGraw Hill, 1970).Google Scholar