Hostname: page-component-7479d7b7d-c9gpj Total loading time: 0 Render date: 2024-07-12T05:28:00.794Z Has data issue: false hasContentIssue false
  • English
  • Français

Composition of Sputter Deposited MoS2 Films During Run-in in Vacuum

Published online by Cambridge University Press:  28 February 2011

P.D. Ehni  and
I.L. Singer
P.D. Ehni
Affiliation:
National Research Council cooperative post-doc
I.L. Singer
Affiliation:
Naval Research Laboratory, Washington, DC 20375-5000, USA
Get access

Abstract

Wear tests were performed under ultra high vacuum conditions in a ball-onflat configuration on magnetron sputtered and triode sputtered MoS2 films on 440C steel substrates. The issue of material loss versus deformation of the film was investigated using energy dispersive x-ray microanalyses for mass loss determinations and Michelson interferometry to measure the deformation of the tracks. Significant deformation without material loss was found in the first 10 passes. Surface composition of the tracks and the transfer film on the ball was determined by Auger electron spectroscopy. The S/Mo ratio wasfound to increase and the O/Mo ratio was found to decrease with increased sliding distance.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 140: Symposium S – New Materials Approaches to Tribology: Theory and Applications , 1988 , 245
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Spalvins, T., ASLE Transactions Vol. 19, 329 (1976).Google Scholar
2. Lince, J.R. and Fleischauer, P.D., J. Mater. Res. 2, 827 (1987).Google Scholar
3. Spalvins, T., Thin Solid Films, 96, 17 (1982).CrossRefGoogle Scholar
4. Fleischauer, P.D. and Bauer, R., Tribology Transactions Vol. 31, 239 (1988).CrossRefGoogle Scholar
5. Matsunaga, M., Homma, T. and Tanaka, A., ASLE Transactions 25, 323 (1982).Google Scholar
6. Fleischauer, P.D., ASLE Transactions 27, 82 (1984).Google Scholar
7. Goldstein, J.I., Newbury, D.E., Echlin, P., Joy, D.C., Fiori, C., and Lifshin, E., Scanning Electron Microscopy and X-Ray Microanalysis, (Plenum Press, New York, 1981), p.355–362.Google Scholar
8. Fleischauer, P.D. and Bauer, R., ASLE Transactions 30, 160 (1987).CrossRefGoogle Scholar