Hostname: page-component-8448b6f56d-m8qmq Total loading time: 0 Render date: 2024-04-19T08:15:00.762Z Has data issue: false hasContentIssue false
  • English
  • Français

A Combined Analysis of Moisture Diffusion with Interface Fracture Mechanics on the Interface Delamination in the Plastic IC Packages During Reflow Soldering

Published online by Cambridge University Press:  10 February 2011

Y. B. Park  and
Jin Yu
Y. B. Park
Affiliation:
Department of Materials Science and Engineering, KAIST, Taejon, 305-701, Korea, byb@cais.kaist.ac.kr, jinyu@cais.kaist.ac.kr
Jin Yu
Affiliation:
Department of Materials Science and Engineering, KAIST, Taejon, 305-701, Korea, byb@cais.kaist.ac.kr, jinyu@cais.kaist.ac.kr
Get access

Abstract

The popcorn cracking phenomenon of plastic IC packages during the reflow soldering was investigated by conducting the stress analysis of heat transfer and moisture diffusion. Vapor pressures at delaminated interfaces between the die pad and EMC(Epoxy molding compound) were calculated and mechanistic parameters such as energy release rate, stress intensity factor and phase angle were derived under various loading conditions; thermal, crack face vapor pressure and mixed loadings. It was shown that thermal loading was the main driving force for crack propagation for small cracks lengths, but vapor pressure loading played more significant role as the crack extended.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 515: Symposium J – Electronic Packaging Materials Science X , 1998 , 31
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kitano, M., Nishimura, A., and Kawai, S., Proc. IRPS, 90(1988).Google Scholar
2. Tay, A. A. O. and Lin, T., IEEE Trans. CPMT-Part A 19(2), 186(1996).Google Scholar
3. Marsh, L. L., Lasky, R., Seraphim, D. P., and Springer, G. S., IBM J. Res. Dev. 28, 655(1984).Google Scholar
4. Timoshenko, S. P., Krieger, S.W., Theory of plates and shells(McGraw-Hill, 1959), p.105.Google Scholar
5. Park, Young B. and Yu, Jin, to be published.Google Scholar
6. Park, Young B. and Yu, Jin, submitted to IEEE Trans. CPMT(1997).Google Scholar
7. Rice, J. R., ASME J. Appl. Mech., 55, 98(1988).Google Scholar
8. Malyshev, B. M. and Salganik, R. L., Int. J. Fract. Mech., 1, 114(1965).Google Scholar
9. Chen, F.H.K. and Shield, R.T., ZAMP J. Appl. Math. Phys., 28, 1(1977).Google Scholar
10. Hutchinson, J. W. and Suo, Z., Advance in Applied Mechanics(Academic Press), 29, 63 (1991).Google Scholar
11. ABAQUS User's Manual, Ver. 5.4, HKS Inc.Google Scholar