Hostname: page-component-7c8c6479df-995ml Total loading time: 0 Render date: 2024-03-28T13:46:12.738Z Has data issue: false hasContentIssue false

Characterization of the Effect of Cr Additions to TiAl-Base Alloys

Published online by Cambridge University Press:  28 February 2011

Shyh-Chin Huang
Affiliation:
General Electric Research and Development Center, Schenectady, NY 12301
Ernest L. Hall
Affiliation:
General Electric Research and Development Center, Schenectady, NY 12301
Get access

Abstract

Ternary TiAl-base alloys containing Cr have been studied, using rapidsolidification processed materials. The mechanical behavior has been characterized and related to other results on microstructure, site occupancy, phase stability, and deformation mode. It was found that Cr additions enhance the plasticity of duplex γ+a2 alloys, but not single-phase alloys. The ductilization effect of Cr is partially due to its ability to occupy Al lattice sites and modify the Ti-Al bond. It is also partially due to its ability to promote twin formation, by modifying the Al partitioning and therefore the a2/γ volume ratio in transformed regions.

Type
Research Article
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Huang, S.C. and Hall, E.L., Mater. Res. Soc. Symp. Proc., 133, 373 (1989).Google Scholar
2. Kim, Y.-W., J. Metals, 41, 24 (1989).Google Scholar
3. Hanamura, T., Uemori, R. and Tanino, M., J. Mater. Res., 3, 656 (1988).Google Scholar
4. Hug, G. and Veyssiere, P., Int. Symp. on Electron Microscopy in Plasticity and Fracture Research of Materials, Dresden, October 8-13, 1989.Google Scholar
5. Tsujimoto, T. and Hashimoto, K., Mater. Res. Soc. Symp. Proc., 133, 391 (1989)Google Scholar
6. Morinaga, M., Saito, J., Yukawa, N. and Adachi, H., Acta Metall., 38, 25 (1990).Google Scholar
7. Huang, S.C., Hall, E.L. and Gigliotti, M.F.X., Sixth World Conference on Titanium (edited by Lacombe, P., Tricot, R., and Beranger, G.), pp. 11091114, Soc. Francaise de Metallurgie, France (1988).Google Scholar
8. Hall, E.L. and Huang, S.C., J. Mat. Res., 4, 595 (1989).Google Scholar
9. Huang, S.C. and Hall, E.L., submitted to Metall. Trans.Google Scholar
10. Rowe, R.G. and Amato, R.A., Structural Metals by Rapid Solidification (edited by Froes, F.H. and Savage, S.J.), pp. 253260, American Society for Metals, Metals Park, OH (1989).Google Scholar
11. Huang, S.C. and Siemers, P.A., Metall. Trans. A, 20A, 1899 (1989).Google Scholar
12. Shong, D.S. and Kim, Y.-W., Scripta Metall., 23, 1181 (1989).Google Scholar
13. Tafto, J. and Spence, J.C.H., Science, 218, 49 (1982).Google Scholar
14. Hall, E.L. and Huang, S.C., Mater. Res. Soc. Symp. Proc., 133, 693 (1989).Google Scholar
15. Kawabata, T., Tamura, T. and Izumi, O., Mater. Res. Soc. Symp. Proc., 133, 329(1989).Google Scholar
16. Hanamura, T. and Tanimo, M., J. Mater. Sci. Lett., 8, 24 (1989).Google Scholar