Hostname: page-component-848d4c4894-89wxm Total loading time: 0 Render date: 2024-07-07T06:34:06.557Z Has data issue: false hasContentIssue false

Characterization of Mechanical Properties of Silicon Nitride Thin Films for Space Applications

Published online by Cambridge University Press:  01 February 2011

Wen-Hsien Chuang
Affiliation:
Department of Electrical and Computer Engineering and Institution for Systems Research University of Maryland, College Park, MD 20742, U.S.A.
Thomas Luger
Affiliation:
Department of Electrical and Computer Engineering and Institution for Systems Research University of Maryland, College Park, MD 20742, U.S.A.
Reza Ghodssi
Affiliation:
Department of Electrical and Computer Engineering and Institution for Systems Research University of Maryland, College Park, MD 20742, U.S.A.
Get access

Abstract

Mechanical properties of micro-electro-mechanical systems (MEMS) materials at cryogenic temperatures are investigated to extend MEMS devices into space applications. A helium-cooled measurement setup mimicking the outer space environment is developed and installed inside a focused-ion-beam (FIB) system. T-shape, low-stress LPCVD silicon nitride cantilevers suspended on a silicon substrate are fabricated as the test structures using bulk micromachining technique. A lead-zirconate-titanate (PZT) translator and a silicon diode are utilized as an actuator and a temperature sensor in the measurement setup, respectively. The resonant frequencies of an identical cantilever with different “milling masses” are measured to obtain the thickness and the Young's modulus. Additionally, a bending test is performed to determine the fracture strength. From the experiments, the Young's modulus of LPCVD silicon nitride thin films varies from 260.5 GPa ± 5.4 GPa at room temperature (298 K) to 266.6 GPa ± 4.1 GPa at 30 K, while the fracture strength ranges from 6.9 GPa ± 0.6 GPa at room temperature to 7.9 GPa ± 0.7 GPa at 30 K.

Type
Research Article
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Tang, T.K., SOI Conference 1999, pp. 67.Google Scholar
2. Moseley, S., Fettig, R., Kutyrev, A., Bowers, C., Kimble, R., Orloff, J., and Woodgate, B., Proceeding of SPIE 3878 (1999).Google Scholar
3. Moseley, S., Fettig, R., Kutyrev, A., Li, M., Mott, D., and Woodgate, B., Proceeding of SPIE 4178 (2000).Google Scholar
4. Chuang, W.H., Luger, T., Fettig, R.K., and Ghodssi, R., AVS 50th International Symposium 2000.Google Scholar