Hostname: page-component-77c89778f8-fv566 Total loading time: 0 Render date: 2024-07-18T22:03:17.833Z Has data issue: false hasContentIssue false

Canister Filling Materials - Design Requirements and Evaluation of Candidate Materials

Published online by Cambridge University Press:  15 February 2011

V. M. Oversby
Affiliation:
Swedish Nuclear Fuel and Waste Management Company, Box 5864, S-102 48 Stockholm, Sweden
L. O. Werme
Affiliation:
Swedish Nuclear Fuel and Waste Management Company, Box 5864, S-102 48 Stockholm, Sweden
Get access

Abstract

SKB has been evaluating a copper/steel canister for use in the disposal of spent nuclear reactor fuel. The canister consists of an outer layer of about 50 mm thickness of copper to provide corrosion resistance and an inner layer of similar size to provide structural strength. Once the canister is breached by corrosion, it is possible that the void volume inside the canister might fill with water. Water inside the canister would moderate the energy of the neutrons emitted by spontaneous fission in the fuel. If the space in the canister between and around the fuel pins is occupied by canister filling materials, the potential for criticality is avoided. We have developed a set of design requirements for canister filling material for the case where it is to be used alone, with no credit for burnup of the fuel or other measures, such as the use of neutron absorbers. Requirements were divided into three classes: essential requirements, desirable features, and undesirable features. The essential requirements are that the material fill at least 60% of the original void space, that the solubility of the filling material be less than 100 mg/l in pure water or expected repository waters at 50°C, and that the material not compact under its own weight by more than 10%. In this paper we review the reasons for these requirements, the desirable and undesirable features, and evaluate 11 candidate materials with respect to the design requirements and features. The candidate materials are glass beads, lead shot, copper spheres, sand, olivine, hematite, magnetite, crushed rock, bentonite, other clays, and concrete. Emphasis is placed on the determination of whether further work is needed to eliminate uncertainties in the evaluation of the ability of a particular filling material to be successfully used under actual conditions, and on the ability to predict the long-term performance of the material under the repository conditions.

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Risenmark, S., Preliminär Kriticitetsberäkning av slutförvaringskapsel. ABB Atom report number BR 93150, Asea Brown Beveri, S-721 63, Västerås, Sweden, Feb. 10, 1993.Google Scholar
2. Agrenius, L., SFL-Utbränningskreditering i slutförvaringskapsel. SKB Rapport 20.158, Svensk Kärnbränslehantering AB, S-102 48 Stockholm, Sweden, July 28, 1993.Google Scholar
3. Oversby, V. M., Design Requirements for Canister Fill Materials, SKB Projekt PM 94–21.500–08, Svensk Kärnbränslehantering AB, S-102 48 Stockholm, Sweden, Feb. 6, 1994.Google Scholar
4. Agrenius, L., SFL-Specifikation av kriticitetsberäkningar för slutförvaringskapseln. SKB Rapport 20.152, Svensk Kärnbränslehantering AB, S-102 48 Stockholm, Sweden, November 24, 1993.Google Scholar
5. Oversby, V. M., Evaluation of Candidates for Canister Filling Materials, SKB Report Number 94–3420–01, Svensk Kärnbränslehantering AB, S-102 48 Stockholm, Sweden, June 6, 1994.Google Scholar
6. KBS-3, Final Storage of Spent Nuclear Reactor Fuel, SKBF/KBS, Stockholm, Sweden, 1983.Google Scholar