Hostname: page-component-848d4c4894-cjp7w Total loading time: 0 Render date: 2024-06-16T01:53:02.501Z Has data issue: false hasContentIssue false

Biaxial Zero Creep Measurements of Interface Energies in Ni/Ag Multilayers

Published online by Cambridge University Press:  10 February 2011

A. C. Lewis
Affiliation:
The Johns Hopkins University, Department of Materials Science and Engineering, Baltimore, MD, USA
A. B. Mann
Affiliation:
The Johns Hopkins University, Department of Materials Science and Engineering, Baltimore, MD, USA
D. Josell
Affiliation:
National Institute of Standards and Technology, Metallurgy Division, Gaithersburg, MD, USA
J. Tapson
Affiliation:
University of Cape Town, Department of Electrical Engineering, Rondebosch, South Africa
T. P. Weihs
Affiliation:
The Johns Hopkins University, Department of Materials Science and Engineering, Baltimore, MD, USA
Get access

Abstract

Biaxial zero creep experiments were performed on Ni/Ag multilayer films on sapphire substrates. The equilibrium curvature was measured using a scanning laser and position sensitive photodetector. The experiments were designed to measure the free energy of Ni/Ag interfaces and to investigate their effect on the structural stability of multilayered materials. For the Ni/Ag multilayers studied, significant plastic straining occurs at temperatures above 400°C, enabling the growth stresses and thermal stresses in the multilayers to decay to zero. After a long time at elevated temperatures, the equilibrium curvature is reached for the film/substrate couple. This curvature is determined by the number and the energy of the Ni/Ag interfaces. Using this equilibrium technique, a free energy of 0.44 ± 0.03 N/m was measured for Ni/Ag interfaces at an equilibrium temperature of 550°C.

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Josell, D. and Spaepen, F., Acta Metall. Mater. 41, 3007 (1993).Google Scholar
[2] Josell, D. and Spaepen, F., Acta Metall. Mater. 41, 3017 (1993).Google Scholar
[3] Josell, D. and Wang, Z. L., Mat. Res. Soc. Symp. Proc., 235, Materials Research Society (1995).Google Scholar
[4] Murr, L. E., Interfacial Phenomena in Metals and Alloys, Addison-Wesley, Reading, MA, 1975.Google Scholar
[5] Josell, D., Acta Metall. Mater. 42, 1031 (1994).Google Scholar
[6] Josell, D., Coriell, S. R., and McFadden, G. B., Acta Metall. Mater. 43, 1987 (1995).Google Scholar
[7] Gumbsch, P. and Daw, M. S., Phys. Rev. B 44, 3934 (1991).Google Scholar
[8] Streitz, F., Cammarata, R. C., and Sieradzki, K., Phys. Rev. B 49, 10707 (1994).Google Scholar