No CrossRef data available.
Article contents
Analysis of the Samples of Fe-Cu-Nb-Si-B Amorphous Alloys Obtained by Dynamic Compacting Method
Published online by Cambridge University Press: 26 February 2011
Abstract
The Dynamic Compacting (DC) method is promising method to produce considerable-size nonporous wares. The phenomenon is based on the impact of shock wave on the initial powders of amorphous alloys. Every time when the shock wave propagates through the bulk of substance then the temperature rises substantially. Therefore there is a need of study of the DC’s effect on the structure and properties of the amorphous alloys. The results of the thermal analysis (in particular, Differential Scanning Calorimetry) of the samples of the soft magnetic alloys are presented in the report. These results concern with amorphous alloys of 5BDSR, GM414, 10NSR trademarks before DC and after DC, respectively. It is shown there is single low-temperature endothermic peak (near 300C) and there are several high temperature exothermic peaks (near 540C, 650C, and 700C). The first peak is related to glass-transition, the following peaks are related to formation of nano-crystalline phases. It was proved by XRD analysis data. The optimal regimes of the thermal processing of final wares were chosen on the base of thermal- and XRD-analysis. The study of the effects of these regimes on the properties (magnetic conductivity, specific losses etc.) of the circular magnetic conductors was executed. In particular, thermal- as well as thermo-magnetic processing of magnetic conductors based on 5BDSR amorphous alloy (after DC) essentially improves their magnetic properties. For example, magnetic conductivity fÝ increases approximately by factor 17 with respect to the magnitude before DC.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2006
References
1
Golubev, Victor A., Strikanov, Andrey V., Bugrov, Vladimir G., Potemkin, Grigory A., Kudel'kin, Valery B.. Dynamic Compacting of Powders of Some Amorphous Alloys, This Volume.Google Scholar
2
Knobel, M., Turtelli, R. Sato, Rechenberg, H.R..”Compositional evolution and magnetic properties of nanocrystalline Fe73.5Cu1Nb3Si13.5B9
”. J.Appl.Phys.
71(12) 5 June 1992, p.6008.Google Scholar
3
Volkov, V.A., Lad'yanov, V.I., Muratov, M.I.. Vliyanie zakristallizovannih poverhnostnih sloiov na formirovanie strukturi pri otzige amorfnih lent splava Fe76.1Cu1.0Nb3.0Si13.8B6.1. Metalli, No1, 1999, pp.100–102.Google Scholar
4
Volkov, V.A., Lad'yanov, V.I., Tsepelev, V.S.. Osobennosti poverhnostnoy i ob'emnoy kristallizatsii lent amorfnogo splava Fe76.1Cu1.0Nb3.0Si13.8B6.1. Metalli, №6, 1998, pp.37–43.Google Scholar
5
Fujinami, Masanori, Hashiguchi, Yoshihiro and Yamamoto, Tsuyoshi. Crystalline Transformations in Amorphous Fe73.5Cu1Nb3Si16.5B6
. Japanese Journal of Applied Physics. Vol. 29, No3, March, 1990, p.p. L477–L480.Google Scholar
6
Kataoka, Noriyuki, Inone, Akihisa, Masumoto, Tsuyoshi, Yoshizawa, Yoshihito and Yamauchi, Kjyotana. Effect of Additional Cu Element of Structure and Crystallization Behavior of Amorphous Fe-Nb-Si-B Alloys. Japanese Journal of Applied Physics vol.28, No10, October. 1989, p.p.L1820–L1823.Google Scholar
7
Noskova, N.I., Ponomareva, E.G.. Structura, prochnost' i plastichnost' nanofaznogo splava Fe73.5Cu1Nb3Si13.5B9
. Fizika metallov i metallovedenie, 1996., v.82, №5, pp.163–171.Google Scholar
8
Noskova, N.I., Ponomareva, E.G., Malisheva, M.M.. Stroenie nanofaz i granits razdela v nanokristallicheskom mnogofaznom splave Fe73.5Cu1Nb3Si13.5B9 i v nanokristallicheskoy medi. Fizika metallov i metallovedenie, 1997., v.83, №5.Google Scholar
9
Noskova, N.I., Ponomareva, E.G., Glazer, A.A., Lukshina, V.A., Potapov, A.P.. Vliyanie predvaritel'noy deformatsii i nizkotemperaturnogo otziga na razmer nanokristallov splava Fe73.5Cu1Nb3Si13.5B9
, poluchennogo pri kristallizatsii amorfnoy lenti. Fizika metallov i metallovedenie, 1993, v.76, №5, pp.171–173.Google Scholar
10
Yoshizawa, Y, Oguma, S, Yamauchi, K. New Fe-based Soft Magnetic Alloys Composed of Ultrafine Grain Structure. J.Appl.Phys.
64(10), 15 November 1998, p.p.6044–6046.Google Scholar
11
Starodubtsev, Yu.N., Bezozyorov, V.Ya. “Magnetic properties of amorphous and nano-crystalline alloys” (Russian), 2002, Ekaterinburg, UrGU publishing house.Google Scholar
12
Levashov, E.A., Rogachev, A.S., Yuhvid, V.I., Borovinskaya, I.P.. Fiziko-himicheskie i tehnologicheskie osnovi samorasprostranyaushegosya visokotemperaturnogo sinteza (SVS). Moskva, Z.A.O. “Izdatel'stvo BINOM”, 1999, pp.174–175.Google Scholar