Hostname: page-component-76fb5796d-dfsvx Total loading time: 0 Render date: 2024-04-26T21:06:16.792Z Has data issue: false hasContentIssue false

Aluminum Wiring Reliability of Fluorinated Amorphous Carbon Interlayer

Published online by Cambridge University Press:  10 February 2011

M. Iguchi
Affiliation:
ULSI Device Development Labs, NEC Corporation Sagamihara, Kanagawa 229, Japan.
Y. Matsubara
Affiliation:
ULSI Device Development Labs, NEC Corporation Sagamihara, Kanagawa 229, Japan.
S. Ito
Affiliation:
ULSI Device Development Labs, NEC Corporation Sagamihara, Kanagawa 229, Japan.
K. Endo
Affiliation:
Silicon System Res. Labs., NEC Corporation Sagamihara, Kanagawa 229, Japan.
K. Koyanagi
Affiliation:
ULSI Device Development Labs, NEC Corporation Sagamihara, Kanagawa 229, Japan.
K. Kishimoto
Affiliation:
ULSI Device Development Labs, NEC Corporation Sagamihara, Kanagawa 229, Japan.
H. Gomi
Affiliation:
ULSI Device Development Labs, NEC Corporation Sagamihara, Kanagawa 229, Japan.
T. Tatsumi
Affiliation:
Silicon System Res. Labs., NEC Corporation Sagamihara, Kanagawa 229, Japan.
T. Horiuchi
Affiliation:
ULSI Device Development Labs, NEC Corporation Sagamihara, Kanagawa 229, Japan.
Get access

Abstract

We investigated the aluminum wiring reliability of fluorinated amorphous carbon (a-C:F) interlayer dielectrics (ILD) using electromigration tests at the wafer level under accelerated stress conditions with current density ranging from 25–32 MA/cm2 and a the substrate temperature of 300 K. The a-C:F film is one of the low-k organic materials with a dielectric constant of 2.5. The thermal conductivity of the a-C:F film (0.108 W/m·K) is about one order lower than that of SiO2 (1.2 W/m.K). We found that joule heating effect is enhanced by the lower thermal conductivity of a-C:F and that the wiring lifetime for a-C:F ILD is about one order lower than that for SiO2 ILD under high current stress. However, when the wiring lifetime is plotted as a function of the wiring temperature, the wiring lifetimes for both a-C:F ILD and SiO2 ILD became almost the same. The degradation of the wiring lifetime for a-C:F ILD is explained by the increase of the wiring temperature which is caused from joule heating. Moreover, the activation energy of the electromigration for a-C:F ILD has the same value as that of SiO2 LD at a temperature.

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Sinha, A. K., et al., IRPS proceedings, 1997, pp. 16.Google Scholar
2. Lee, W. W. and Ho, P. S., MRS BULLETIN, October 1997, pp. 1923.Google Scholar
3. Wang, P. and Ho, P. S., DUMIC proceedings, 1998, pp. 235244.Google Scholar
4. Endo, K. and Tatsumi, T., Appl. Phys. Lett. Vol.68, No. 20, 1996, pp. 28642866.Google Scholar
5. Black, J. R., Annual Symp. Reliability Phy. proceedings, 1967, pp. 149151.Google Scholar