Hostname: page-component-76fb5796d-r6qrq Total loading time: 0 Render date: 2024-04-26T10:06:07.253Z Has data issue: false hasContentIssue false
  • English
  • Français

Acoustic Imaging of Microstructures of Carbon Fiber-Reinforced Composite Laminates

Published online by Cambridge University Press:  14 March 2011

Songping Liu ,
Vadim M. Levin  and
Enming Guo
Songping Liu
Affiliation:
The NDT&E Center for Composites, Beijing Aeronautical Manufacturing Technology Research Institute, Beijing 100024, China
Vadim M. Levin
Affiliation:
Lab. of Acoustic Microscopy, Institute of Biochemical Physics, Russian Academy of Sciences, 4 Kosygin St, Moscow 117977, Russia
Enming Guo
Affiliation:
The NDT&E Center for Composites, Beijing Aeronautical Manufacturing Technology Research Institute, Beijing 100024, China
Get access

Abstract

The properties and homogeneity of a composite laminate are strongly dependent on structures and microstructures in it. The investigations have shown that the microstructures of carbon fiber-reinforced polymer composite laminates can be visualized by means of acoustic imaging techniques. The frequency of ultrasonic wave to be used is up to 50MHz. The composite laminates to be investigated include unidirectional carbon fiber-reinforced polymer composite laminates, bi-directional carbon fiber-reinforced polymer composite laminates and carbon fiber woven composite laminates. Very useful quantitative information about inside structures of the composites can be visualized in plan-section of the laminates in the depth directions by ultrasonic T-scan imaging technique. Typical results have been represented in this article.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 702: Symposium U – Advanced Fibers, Plastics, Laminates and Composites , 2001 , U10.3.1
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kanovich, M. Z., Koltunov, M. A. and Roginskii, S. L., “Investigation of the fibre packing density in a unidirectional composite” Polym Mech 12 pp493–495 (1976).Google Scholar
2. Clarke, A.R. and Davidson, N., “Determining the spatial distributions of fibres in composites”, Proc ICAM 91Symp A4, pp 55–60 (1991).Google Scholar
3. Hemsley, D., “The importance of microstructure to the in-service survival of plastics products” Plastics, Rubber & Composites Proc & App 16 pp77–78 (1991).Google Scholar
4. Guild, F.J. and Ralph, B., “Microstructure-property relationships of CRP” J Mater Sci 14 pp2555–2562 (1979).Google Scholar
5. Green, D. and Guild, F.J., “Quantitative microstructural analysis of a continuous fibre composite” Composites 22 pp239–242 (1991).Google Scholar
6. Summerscales, J., Green, D. and Guild, F.J., “Effect of processing parameters on the microstructure of a fibre reinforced composite” J. Microscopy 169 pp 173–182 (1993).Google Scholar
7. Stroeven, P., “The analysis of fibre distributions in fibre reinforced materials” J. Microscopy 111 pp 283–295 (1977).Google Scholar
8. Wimolkiatisak, A.S., Bell, J.P., et al, “Assessment of fibre arrangement and contiguity in composites materials by image analysis” Polym Composites 11 pp274–279 (1990).Google Scholar