Hostname: page-component-7479d7b7d-rvbq7 Total loading time: 0 Render date: 2024-07-12T00:29:56.201Z Has data issue: false hasContentIssue false
  • English
  • Français

Superconducting Interconnections in Future High Performance Systems

Published online by Cambridge University Press:  21 February 2011

R. C. Frye
R. C. Frye*
Affiliation:
AT&T Bell Laboratories, Murray Hill, NJ 07974
Get access

Abstract

New, high temperature superconducting materials could eventually be used for interconnections in electronic systems. Such interconnections would undoubtedly cost more to implement than conventional ones, so the most likely applications would be for complex, high-speed systems that could benefit from the performance advantages of a resistance-free interconnecting medium. The problem with conventional conductors in these systems is that the resistance of wires increases quadratically as dimensions are scaled down. The most important advantage offered by superconductors is that they are not linked to this scaling rule. Their principal limitation is the maximum current density that they will support and this determines the range of applications for which they are superior to conventional conductors. An analysis will be presented which examines the relative advantages of superconductors for different critical current densities, wire dimensions and system sizes.

If their critical current densities are adequate, and if they can statisfy a number of processing criteria, then superconductors could find useful applications in a number of high performance electronic systems. The most likely applications will be those demanding very high interconnection densities. Several of these systems will be discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 108 , 1987 , 27
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Edwards, T. C., “Foundations for Microstrip Circuit Design” John Wiley and Sons, New York (1981).Google Scholar
[2]McCaa, W. D. and Nahman, N. S., J. Appl. Phys. 39 2592 (1968).Google Scholar
[3]McCaa, W. D. and Nahman, N. S., J. Appl. Phys. 40 2098 (1969).Google Scholar
[4]Rainal, A. J. to be published.Google Scholar
[5]Stranghan, C. J. and MacDonald, B. M., IEEE Proc. 35th Electronic Components Conf. 361 (1985).Google Scholar
[6]Rainal, A. J., AT&T Bell Laboratories Tech. J. 63 177 (1984).Google Scholar
[7]Lewis, E. T., IEEE Trans. Components, Hybrids and Manuf. Tech. CHMT–2 441 (1979).Google Scholar
[8]Ho, C. W., Chance, D. A., Bajorek, C. H., and Acosta, R. E., IBM J. Res. Develop. 26 286 (1982).Google Scholar
[9]Tai, K. L., these proceedings.Google Scholar
[10]Herrell, D. and Carey, D.IEEE Trans. Components, Hybrids and Manuf. Tech. CHMT–10 199 (1987).Google Scholar
[11]Sato, K., Yoshikiyo, H., Aoki, K. and Ohiro, F.IEEE Trans. Components, Hybrids and Manuf. Tech. CHMT–9 145 (1986).Google Scholar