Hostname: page-component-7479d7b7d-qs9v7 Total loading time: 0 Render date: 2024-07-12T09:18:28.488Z Has data issue: false hasContentIssue false
  • English
  • Français

The Relationship Between Morphology and Esc in Thermoplastic Toughened Phenolics

Published online by Cambridge University Press:  15 February 2011

A. R. Eccott ,
J. C. Arnold  and
D. H. Isaac
A. R. Eccott
Affiliation:
Department of Materials Engineering, University College, Swansea, U.K.
J. C. Arnold
Affiliation:
Department of Materials Engineering, University College, Swansea, U.K.
D. H. Isaac
Affiliation:
Department of Materials Engineering, University College, Swansea, U.K.
Get access

Abstract

A detailed investigation has been performed to relate the environmental stress cracking (ESC) behaviour of thermoplastic toughened phenolic materials to their morphology. Within the range of added thermoplastic studied (0 to 35%), two scales of morphology were seen to occur. In addition to a small scale interpenetrating network, there exists a larger scale morphology formed from “seas” of excess and immiscible thermoplastic. The large scale morphology was studied by performing interference contrast optical microscopy on samples etched with permanganate. A good correlation was obtained between the amount of thermoplastic in the immiscible regions and the overall fraction of thermoplastic in the sample.

Etched samples were subject to ESC via bend tests in methanol and the effects of the morphology on the crack behaviour were observed microscopically while samples were still in the bent condition. It was evident that the large scale morphology was responsible for deflecting microcracks so that they preferentially grew along the interface between the immiscible thermoplastic and well mixed regions.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 305: Symposium I – High-Performance Polymers and Polymer Matrix Composites , 1993 , 199
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. D.R. Moore, J. Carter, P. McGrail, W.Colclough, and M.Choate, Proceedings of polymer composites for structural automotive applications SP-812, SAE Technical paper 900069, Detroit,1.Google Scholar
2. British Plastics and Rubber, Jul/Aug 1990, 33Google Scholar
3. Almen, G.R., Maskell, R., Malhotra, V., Sefton, M., McGrail, P., Wilkinson, S., 33rd International SAMPE Symposium, March 1988, pp.979 Google Scholar
4. Vincent, P.,Raha, S., Polymer,13, 283 (1972)Google Scholar
5. Eccott, A.R., Isaac, D.H., Arnold, J.C., Key Engineering Materials, 72–73, 673 (1992)Google Scholar
6. Brown, N., in Polymers Part C, edited by Fava, R.A., (Academic Press, New York, 1980) pp.233 Google Scholar