Hostname: page-component-84b7d79bbc-l82ql Total loading time: 0 Render date: 2024-07-26T04:30:40.152Z Has data issue: false hasContentIssue false
  • English
  • Français

Rapid Increases in Permeability and Porosity of Bentonite-Sand Mixtures Due to Alteration by Water Vapor

Published online by Cambridge University Press:  26 February 2011

Rex A. Couture
Rex A. Couture*
Affiliation:
Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439
Get access

Abstract

Packed columns of canister packing material containing 25% bentonite and 75% quartz or basalt sand, were exposed to water vapor at temperatures of up to 260°C. The permeabilities of the columns were subsequently measured after complete saturation with liquid water in a pressurized system. Exposure to water vapor caused irreversible increases in permeability by factors of up to 105. After saturation with liquid water, the permeability was nearly independent of temperature. The increases in permeability were due to a large decrease in the ability of the bentonite to swell in water. Calculations suggest that swelling of bentonite exposed to water vapor at 250°C was not sufficient to fill the pore spaces. If the pore spaces are filled, the mixture will form an effective barrier against flow, diffusion, and transport of colloids.

The results suggest that if bentonite-based canister packing material is exposed even briefly to water vapor at high temperatures in a high-level nuclear waste repository, its performance will be seriously impaired. The problem will be less severe if the proportion of bentonite is high and the material is highly compacted. Previous results show significant degradation of bentonite by water vapor at temperatures as low as 150°C. This suggests that in some repositories, backfill in tunnels and drifts may also be affected.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 44: Symposium N – Scientific Basis for Nuclear Waste Management VIII , 1984 , 515
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Allen, C. C., Lane, D. L., Palmer, R. A., and Johnston, R. G., “Experimental Studies of Packing Material Stability,” Materials Res. Soc. Symp. Proc. v.26, p. 105–112, Elsevier (1984).Google Scholar
2. Couture, R., “Steam Rapidly Reduces the Swelling Capacity of Bentonite,” in preparation; Couture, R. in “Nuclear Technology Programs Quarterly Progress Report, April-June 1984,” Argonne Hational Laboratory, Argonne, IL, ANL-84–57.Google Scholar
3. Bradley, D. J. et al., “Nuclear Waste Package Materials Testing Report, Basaltic and Tuffaceous Environments,” Battelle Pacific Northwest Laboratory, Richland, WA, PNL-4452 (1983).Google Scholar
4. Krumhansl, J. L., “Observations Regarding the Stability of Bentonite Backfill in a High-Level Waste Repository in Rock Salt,” Sandia National Laboratories, Albuquerque, NM, SAND-83–1293J (1984).Google Scholar
5. Moore, Donald, Baroid Corp., oral communication (1984).Google Scholar
6. Couture, R. and Bane, R., in “Nuclear Technology Programs Quarterly Progress Report, January-March 1984,” Argonne National Laboratory, Argonne, IL, AML-84–37 (1984).Google Scholar
7. Couture, R. and Seitz, M., in “NRC Nuclear Waste Geochemistry 1983,” U.S. Nuclear Regulatory Conmmission, Washington, D.C., NUREG/CP-0052 (1984).Google Scholar
8. Norrish, K., Disc. Faraday Soc. 18, 120–134 (1954).Google Scholar
9. Chambré, Paul L. and Pigford, Thomas H., “Prediction of Waste Performance in a Geologic Repository,” Materials Res. Soc. Symp. Proc., v. 26, p. 985–1008, Elsevier (1984).Google Scholar