Hostname: page-component-7479d7b7d-8zxtt Total loading time: 0 Render date: 2024-07-12T05:28:35.527Z Has data issue: false hasContentIssue false

Modeling the Optical Quantum Efficiency of Thin Film Amorphous Silicon Solar Cells

Published online by Cambridge University Press:  17 March 2011

Sally-anne F. Rowlands
Affiliation:
Electrical and Electronic Engineering, University of Western Australia, Perth, WesternAustralia, 6907.
John Livingstone
Affiliation:
Electrical and Electronic Engineering, University of Western Australia, Perth, WesternAustralia, 6907.
Christopher P. Lund
Affiliation:
Physics and Energy Studies, Murdoch University, Perth, Western Australia, 6150.
Get access

Abstract

The optical quantum efficiency and spectral response of p-i-n thin film amorphous silicon (a-Si:H) solar cells have been modeled using software based on optical admittance analysis. The optical constants of a-Si:H and Indium Tin Oxide (ITO) thin film layers have been measured by Variable Angle Spectroscopic Ellipsometry (VASE) and used as inputs into the optical admittance analysis program in order to model cells constructed from these films.

Amorphous silicon thin films and p-i-n assemblies have been deposited by glow discharge and reactive sputtering techniques. The optical constants of doped and intrinsic a-Si:H thin films were determined by VASE and the film thickness verified by Scanning Electron Microscopy studies. The optical constants of commercially available transparent conducting oxide (TCO) coated substrates have also been determined by VASE.

The experimental transmission spectra of p-i-n assemblies are compared with transmission spectra that have been modeled using the measured optical constants. Results of modeling different a-Si:H solar cell structures using these materials are presented, including a study of the optimal TCO layer thickness for p-i-n a-Si:H solar cells. This work shows that optical admittance modeling gives a good prediction of the optical behavior of p-i-n assemblies, but that accurate measurements of the optical constants of the component films are required in order to model effectively the optical quantum efficiency and photocurrent.

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Garland, J. W., Kim, C., Abad, H., and Raccah, P. M., Phys. Rev. B, 41(11), 76027610, (1990).Google Scholar
2. Herzinger, C. M., Snyder, P. G., Johs, B., and Woollam, J. A., J. Appl. Phys. 77(4), 17151724, (1995).Google Scholar
3. Hamberg, I. and Granqvist, C. G., J. Appl. Phys., 60, R123, (1986).Google Scholar
4. Eskenas, K. and Miller, S., 20th IEEE PVSC, 176, (1988).Google Scholar
5. Ellis, F. and Delahoy, A., Solar Energy Mater., 13, 109, (1986).Google Scholar
6. Zhu, F.. and Singh, J., J. Non-Cryst. Solids, 152, 7582, (1993).Google Scholar
7. Dawson, R., Li, Y., Gunes, M., Heller, D., Nag, S., Collins, R., Wronski, C., and Bennett, M., Mat. Res. Soc. Symp. Proc., 258, 595600, (1992).Google Scholar
8. Cody, G., Semiconductors and Semimetals, 21B, edited by Pankove, J. I. (Academic Press Inc., New York, 1984) 1181, (1984).Google Scholar
9. Macleod, H. A., (1986). Thin Film Optical Filters, (Adam Hilger Ltd, Bristol, 1986).Google Scholar
10. Zhu, F. and Singh, J., Solar Energy Materials and Solar Cells, 31, 119131, (1993).Google Scholar
11. Zhu, F., Fuyuki, T., Matsunami, H., Singh, J., Solar Energy Materials and Solar Cells, 39, 19, (1995).Google Scholar
12. Palik, E. D. ed., Handbook of Optical Constants of Solids, (Academic Press Inc., San Diego, 1985).Google Scholar
13. Stulik, P. and Singh, J., Solar Energy Materials and Solar Cells, 40, 239251, (1996).Google Scholar
14. Stulik, P. and Singh, J., J. Non-Cryst. Solids, 242, 115121, (1998).Google Scholar