Hostname: page-component-7bb8b95d7b-lvwk9 Total loading time: 0 Render date: 2024-09-13T02:11:57.510Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructures, Defects and Deformation Mechanisms in Vanadium Modified Nb3Al

Published online by Cambridge University Press:  25 February 2011

L.S. Smith ,
M. Aindow  and
M.H. Loretto
L.S. Smith
Affiliation:
IRC in Materials for High Performance Applications, and School of Metallurgy and Materials, The University of Birmingham, Edgbaston, Birmingham, B15 2TT, UK.
M. Aindow
Affiliation:
IRC in Materials for High Performance Applications, and School of Metallurgy and Materials, The University of Birmingham, Edgbaston, Birmingham, B15 2TT, UK.
M.H. Loretto
Affiliation:
IRC in Materials for High Performance Applications, and School of Metallurgy and Materials, The University of Birmingham, Edgbaston, Birmingham, B15 2TT, UK.
Get access

Abstract

A transmission electron microscope study of the microstructure and defect structure in vanadium modified Nb3Al and its deformation mechanisms is presented. Two alloys are examined in which 20 and 40 atomic % V is substituted for Nb. The former alloy exhibits a microstructure containing a stable A15 phase and a metastable B2 phase which transforms to A15 upon heat treatment. The A15 grains contain defects similar to those observed previously in binary Nb3Al: i.e. large growth faults with R=1/4<012> and dissociated dislocations with a separation of =15nm and b=1/2<001> bounding a stacking fault with R=1/2<001>. The alloy containing 40 atomic % V consists only of an equilibrium B2 phase and exhibits greatly enhanced ductility. Slip occurs by the glide of dislocations with b=<111> on {011}.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 322: Symposium F – High-Temperature Silicides and Refractory Alloys , 1993 , 453
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Marieb, T.N., Kaiser, A.D., Nutt, S.R., Anton, D.L. and Shah, D.M., in High Temperature Intermetallic Alloys IV, edited by Johnson, L.A., Pope, D.P. and Steigler, J.O. (Mater. Res. Soc., 213, Pittsburgh, PA, 1991) p. 141.Google Scholar
[2] Aindow, M., Shyue, J., Gaspar, T.A. and Fraser, H.L., Phil. Mag. Lett., 64, 59 (1991).Google Scholar
[3] Mises, R. von, Z. Angew. Math. Mech., 8, 161 (1928).CrossRefGoogle Scholar
[4] Shyue, J., Hou, D-H, Johnson, S., Aindow, M. and Fraser, H., in High Temperature Intermetallic Alloys V, edited by Baker, I., Darolia, R., Whittenberger, J.D. and Yoo, M.H. (Mater. Res. Soc., 288, Pittsburgh, PA, 1993) p.573. J. Shyue, D-H. Hou, M. Aindow and H.L. Fraser, J. Mat. Sci. and Eng. 170:1 (1993).Google Scholar
[5] Anton, D.L. and Shah, D.M., in Intermetallic Compounds: Structure and Mechanical Properties, edited by Izumi, O. (Sendai, Japan, 1991) p. 379.Google Scholar
[6] Pettifor, D.G., J. Phys. C, 19,285 (1986).Google Scholar
[7] Kohmoto, H., Shyue, J., Aindow, M. and Fraser, H.L., Scripta Met. 29, 1241, (1993)Google Scholar
[8] Smith, L.S., Cheng, T-T. and Aindow, M., in High Temperature Intermetallic Alloys V, edited by Baker, I., Darolia, R., Whittenberger, J.D. and Yoo, M.H. (Mater. Res. Soc., 288, Pittsburgh, PA, 1993) p.263.Google Scholar
[9] Rachinger, W.A. and Cottrell, A.H., Acta Met., 4, 109 (1956).Google Scholar