Hostname: page-component-77c89778f8-m8s7h Total loading time: 0 Render date: 2024-07-22T11:46:36.317Z Has data issue: false hasContentIssue false
  • English
  • Français

Fluorinated Silicon Nitride (a-Si:N,F,H) Films Using NF3 for Amorphous Silicon Based Solar Cells

Published online by Cambridge University Press:  25 February 2011

Freddy. H. C. Goh ,
S. M. Tan ,
K. Ng ,
H. A. Naseem ,
W. D. Brown  and
A. M. Hermann
Freddy. H. C. Goh
Affiliation:
Department of Electrical Engineering, University of Arkansas, Fayetteville, AR 72701
S. M. Tan
Affiliation:
Department of Electrical Engineering, University of Arkansas, Fayetteville, AR 72701
K. Ng
Affiliation:
Department of Electrical Engineering, University of Arkansas, Fayetteville, AR 72701
H. A. Naseem
Affiliation:
Department of Electrical Engineering, University of Arkansas, Fayetteville, AR 72701
W. D. Brown
Affiliation:
Department of Electrical Engineering, University of Arkansas, Fayetteville, AR 72701
A. M. Hermann
Affiliation:
Department of Electrical Engineering, University of Arkansas, Fayetteville, AR 72701
Get access

Abstract

The large amounts of methane commonly used to prepare wide-gap a-SiC:H films present a lot of problems. This study was aimed at investigating the properties of fluorinated silicon nitride as an alternative to silicon carbide and to study the thermal stability of the films.

The RF glow discharge of NF3 (an etchant gas) and pure SiH4 produced a-Si:H,N,F films. Films were deposited with a gas ratio of NF3 over (NF3 + SiH4) from 0% to 15%. The substrate temperature, chamber pressure, and power were kept constant; only flow rate was varied. Characterizations of the films included AES, FTIR, visible/UV spectroscopy, dark conductivity, and photoconductivity.

Deposition rate increased about eight times with an addition of 6% NF3. The deposition rate increased from 1.22 A/s to 10.5 A/s. The Tauc optical gap increased from 1.72 eV to about 2.06 eV, suggesting excellent N incorporation. The dark conductivity decreased one order of magnitude while the photoconductivity decreased by as much as five orders of magnitude with ELH light. FTIR spectra showed the nitrogen incorporation. The Si-N bonds replaced the Si-Si bonds with increasing NF3 concentration. Also with increasing NF3 content in the gas phase, the hydrogen concentration in the material decreased and the films became more thermally stable.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 192: Symposium O – Amorphous Silicon Technology - 1990 , 1990 , 75
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Ng, K., MSEE thesis, University of Arkansas, (1989).Google Scholar
[2]. Williamson, D.L., Mahan, A.H., Nelson, B.P., and Crandell, R.S., Appl. Phys. Lett. 55 (8),21 Aug. (1989).Google Scholar
[3]. Wong, B., Morel, D.L., and Grosvenor, V.G., Technical Digest of the International PVSEC-1, Kobe, Japan.Google Scholar
[4]. Fujita, S., Toyoshima, H., Ohishi, T., and Sasaki, A, Jap. J. Appl. Phy. Vol. 23, No. 3, (1984), pp. L144–L184.Google Scholar
[5]. Carlson, D.E., Appl. Phys. A 41, (1986), pp. 305–309;Google Scholar
Jackson, W.B. and Kakalios, J., Phys. Rev. B, Vol. 37, No. 2 (1988) .Google Scholar
[6]. Bagdan, G., Barkanic, J.A., and Andrew, H., Microelectr. Journal, 16(1). (1985), pp. 5–21.Google Scholar
[7]. Tauc, J., in Amorphous and Liquid Semiconductors, (Ed., Tauc, J.), (Plenum Press, New York 1974), chapter 4.Google Scholar
[8]. Luft, W. and Tsuo, S., Appl. Phy. Comm., Vol. 8, No.l (1988).Google Scholar