Hostname: page-component-5c6d5d7d68-thh2z Total loading time: 0 Render date: 2024-08-16T06:46:58.887Z Has data issue: false hasContentIssue false
  • English
  • Français

Development of Al-Cu-Fe Quasicrystal-Poly(p-phenylene sulfide) Composites

Published online by Cambridge University Press:  17 March 2011

Paul D. Bloom ,
K.G. Baikerikar ,
James W. Anderegg  and
Valerie V. Sheares
Paul D. Bloom
Affiliation:
Department of Chemistry, Iowa State University Ames, IA 50011, U.S.A
K.G. Baikerikar
Affiliation:
Ames Laboratory, Iowa State University Ames, IA 50011, U.S.A
James W. Anderegg
Affiliation:
Ames Laboratory, Iowa State University Ames, IA 50011, U.S.A
Valerie V. Sheares
Affiliation:
Department of Chemistry, Iowa State University Ames, IA 50011, U.S.A
Get access

Abstract

Quasicrystalline Al-Cu-Fe powders were used as a novel filler material in poly(p-phenylene sulfide) (PPS). These polymer/quasicrystal composites showed useful properties that may be beneficially exploited in applications such as dry bearings and composite gears. Al-Cu-Fe quasicrystalline filler significantly improved wear resistance to volume loss in polymer-based composites. In addition to improving the composite wear resistance, the Al-Cu-Fe filler showed low abrasion to the 52100 chrome steel counterface. Furthermore, mechanical testing results showed a two-fold increase in the storage modulus of the reinforced composites compared with the polymer samples. In addition, the Al-Cu-Fe filler was compared to its constituent metals, aluminum oxide, and silicon carbide in PPS. Chemical analysis of the wear interface by X-ray spectroscopy indicated the generation of a third body oxide layer during wear. The fabrication in addition to the thermal, mechanical, and wear properties of these unique materials is described.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 643: Symposium K – Quasicrystals-Preparation, Properties, and Applications , 2000 , K16.3
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Katz, H.S. and Milewski, J.V., eds. Handbook of Fillers for Plastics, (Van Nostrand Reinhold Company Inc., New York, 1987), pp. 1-61, 216-217, 245–270.Google Scholar
2. Shechtman, D., Blech, I., Gratias, D., and Cahn, J.W., Phys, Rev. Lett. 53, 1951–1953 (1984)Google Scholar
3. Dubois, J. M.. A Survey of the Potential Applications of Quasicrystals. New Horiz. Quasicrystals [Conf.], (World Scientific, Singapore, Singapore, 1997), pp. 208–215 Google Scholar
4. Urban, K., Feuerbacher, M., and Wollgarten, M., MRS Bulletin 22(11), 65–68 (1997).Google Scholar
5. Lutz, D., The Industrial Physicist. 2(4), 26 (1996)Google Scholar
6. Brown, M., Technical Insights' Futuretech. 233 April 5, 1999.Google Scholar
7. Bloom, P.D. and Sheares, V.V., U.S. Patent (filed 5/99).Google Scholar
8. Shield, J.E., Goldman, A.I., Anderson, I.E., Ellis, T.W., McCallum, R.W., and Sordelet, D.J., U.S. Patent No. 5,433,978, (July 18, 1995).Google Scholar
9. Sordelet, D.J., Besser, M.F., and Anderson, I.E., J. Thermal Spray Tech., 5, 161–174 (1996).Google Scholar
10. Odian, G., Principles of Polymerization, 3rd ed., (John Wiley & Sons, Inc., New York, 1991), p. 157.Google Scholar
11. Bahadur, S. and Gong, D., Wear, 158, 41–59 (1992).Google Scholar