Hostname: page-component-7479d7b7d-k7p5g Total loading time: 0 Render date: 2024-07-11T08:07:04.048Z Has data issue: false hasContentIssue false
  • English
  • Français

Defects and Strain in GexSi1−x Layers Grown by Rapid Thermal Processing Chemical Vapor Deposition

Published online by Cambridge University Press:  25 February 2011

K. H. Jung ,
Y. M. Kim ,
H. G. Chun ,
D. L. Kwong  and
L. Rabenberg
K. H. Jung
Affiliation:
Microelectronics Research Center Department of Electrical and Computer EngineeringThe University of Texas at Austin, Austin, TX 78712
Y. M. Kim
Affiliation:
Microelectronics Research Center Department of Electrical and Computer EngineeringThe University of Texas at Austin, Austin, TX 78712
H. G. Chun
Affiliation:
Microelectronics Research Center Department of Electrical and Computer EngineeringThe University of Texas at Austin, Austin, TX 78712
D. L. Kwong
Affiliation:
Microelectronics Research Center Department of Electrical and Computer EngineeringThe University of Texas at Austin, Austin, TX 78712
L. Rabenberg
Affiliation:
Center for Materials Science and EngineeringThe University of Texas at Austin, Austin, TX 78712
Get access

Abstract

We have grown single and multi-layer epitaxial GexSi1−x/Si structures by RTPCVD on (100)Si substrates using GeH4 and SiH2Cl2 at 900°C and 1000°C with SiH2Cl2:GeHH4 ratios of 14:1 to 95:1 at 5 Torr. Plane view TEM micrographs indicate misfit dislocation free layers were grown for Ge concentrations of up to 13%. Misfit dislocation networks aligned along <110> were formed at the interface of films with higher Ge concentrations. Plane view TEM micrographs also showed dislocation loops at the interface. When the SiH2C12:GeH4 ratio used was less than 25:1, the GexSil−x layer grew by three-dimensional nucleation, resulting in a high density of defects.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 148: Symposium D – Chemistry and Defects in Semiconductor Heterostructures , 1989 , 335
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Daembkes, H., Herzog, H. J., Jorke, H., Kibbel, H., and Kasper, E., IEEE Trans. Electron Dev., ED–33, 633 (1986).CrossRefGoogle Scholar
2 Patton, G. L., Iyer, S. S., DeLage, S. L., Tiwari, S., and Stork, J. M. C., IEEE Electron Dev. Lett., EDL–9, 165 (1988).Google Scholar
3 Temkin, H., Pearsall, T. P., Bean, J. C., Logan, R. A., and Luryi, S., Appl. Phys. Lett., 48, 963 (1986).Google Scholar
4 Lee, S. K., Ph. D. dissertation, The University of Texas at Austin (1988).Google Scholar
5 Hsieh, T. Y., Chun, H. G., Kwong, D. L., and Spratt, D. B., B 1.7, to be presented at the MRS Spring Meeting (1989).Google Scholar
6 Jung, K. H., Kim, Y. M., Chun, H. G., Kwong, D. L., Rabenberg, L., B1.16, to be presented at the MRS Spring Meeting (1989).Google Scholar
7 Kasper, E., Herzog, H. J., Daembkes, H., and Abstreiter, G., Layered Structures and Epitaxy, Materials Research Society: Pittsburgh, 56, 347 (1986)Google Scholar